REFERENCE TABLE · 332 ALLOYS
Chemical composition of alloys
The nominal analysis of the alloys we trade every day: stainless steels, nickel and cobalt superalloys, tool and high-speed steels, titanium. Search by trade name, AISI grade, UNS number or Werkstoff-Nr.
/
332 alloys
Nominal values in weight %: see “How to read the table” at the bottom of the page.
Send us the grade and analysis of your material: we will identify it.
Request a quotation →01 · 52 alloys
Stainless steels
Balance Fe
| Alloy | UNS · W.Nr. | Cr | Ni | C max | Mn max | P max | Si max | Other | Quote |
|---|---|---|---|---|---|---|---|---|---|
| AISI 201 | S20100 1.4372 | 16–18 | 3.5–5.5 | 0.15 | 7.5 | 0.06 | 1.0 | N 0.5 max | Quote |
| AISI 202 | S20200 1.4373 | 17–19 | 4–6 | 0.15 | 10 | 0.06 | 1 | N 0.5 max | Quote |
| AISI 204 | 18 | 5 | 0.07 | 9 | – | 0.5 | N 0.2 | Quote | |
| AISI 205 | S20500 | 17 | 1.4 | 0.18 | 15 | 0.03 | 0.4 | N 0.35 | Quote |
| AISI 301 | S30100 1.4310 | 16–18 | 6–8 | 0.15 | 2 | 0.045 | 1 | – | Quote |
| AISI 302 | S30200 | 17–19 | 8–10 | 0.15 | 2 | 0.045 | 1 | – | Quote |
| AISI 303 | S30300 1.4305 | 17–19 | 8–10 | 0.15 | 2 | 0.2 | 1 | S 0.15 min | Quote |
| AISI 303 SE | S30323 | 17–19 | 8–10 | 0.15 | 2 | 0.2 | 1 | Se 0.15 min | Quote |
| AISI 304 Data sheet | S30400 1.4301 | 18–20 | 8–12 | 0.08 | 2 | 0.045 | 1 | – | Quote |
| AISI 304 L | S30403 1.4307 | 18–20 | 8–12 | 0.03 | 2 | 0.045 | 1 | – | Quote |
| AISI 305 | S30500 1.4303 | 17–19 | 10–13 | 0.12 | 2 | 0.045 | 1 | – | Quote |
| AISI 308 | S30800 | 19–21 | 10–12 | 0.08 | 2 | 0.045 | 1 | – | Quote |
| AISI 309 | S30900 | 22–24 | 12–15 | 0.2 | 2 | 0.045 | 1 | – | Quote |
| AISI 309 S | S30908 1.4833 | 22–24 | 12–15 | 0.08 | 2 | 0.045 | 1 | – | Quote |
| AISI 310 (24/20) | S31000 | 24–26 | 19–22 | 0.25 | 2 | 0.045 | 1.5 | – | Quote |
| AISI 310 S | S31008 1.4845 | 24–26 | 19–22 | 0.08 | 2 | 0.045 | 1.5 | – | Quote |
| AISI 311 | 18–20 | 24–26 | 0.25 | 2 | 0.045 | 3 | – | Quote | |
| AISI 312 | 23–26 | 8–11 | 0.25 | 2 | 0.045 | 3 | – | Quote | |
| AISI 316 Data sheet | S31600 1.4401 | 16–18 | 10–14 | 0.08 | 2 | 0.045 | 1 | Mo 2.0–3.0 | Quote |
| AISI 316 L | S31603 1.4404 | 16–18 | 10–14 | 0.03 | 2 | 0.045 | 1 | Mo 2.0–3.0 | Quote |
| AISI 317 | S31700 | 18–20 | 11–15 | 0.08 | 2 | 0.045 | 1 | Mo 3.0–4.0 | Quote |
| AISI 321 | S32100 1.4541 | 17–19 | 9–12 | 0.08 | 2 | 0.045 | 1 | Ti 5xC min | Quote |
| AISI 329 | S32900 1.4460 | 23–28 | 5 | 0.2 | 2 | – | – | Mo 1–1.5 | Quote |
| AISI 330 | 14–16 | 33–36 | 0.25 | 2 | 0.045 | 0.75 | – | Quote | |
| 35/15 | → see AISI 330 | ||||||||
| AISI 347 | S34700 1.4550 | 17–19 | 9–13 | 0.08 | 2 | 0.045 | 1 | Cb-Ta 10xC min | Quote |
| AISI 348 | S34800 | 17–19 | 9–13 | 0.08 | 2 | 0.045 | 1 | Cb-Ta 10xC min · Ta 0.10 max · Co 0.10 max | Quote |
| AISI 403 | S40300 | 11.5–13 | – | 0.15 | 1 | 0.04 | 0.5 | – | Quote |
| AISI 405 | S40500 1.4002 | 11.5–14.5 | – | 0.08 | 1 | 0.04 | 1 | Al 0.10–0.30 | Quote |
| AISI 409 | S40900 1.4512 | 10.5–13.5 | – | 0.05 | 0.55 | 0.045 | 0.5 | Al 0.5 Ti 0.45 | Quote |
| AISI 410 | S41000 1.4006 | 11.5–13.5 | – | 0.15 | 1 | 0.04 | 1 | – | Quote |
| AISI 414 | S41400 | 11.5–13.5 | 1.25–2.5 | 0.15 | 1 | 0.04 | 1 | – | Quote |
| AISI 416 | S41600 1.4005 | 12.0–14.0 | – | 0.15 | 1.25 | 0.06 | 1 | S 0.15 min | Quote |
| AISI 420 | S42000 1.4021 | 12.0–14.0 | – | 0.15 min | 1 | 0.04 | 1 | – | Quote |
| AISI 430 | S43000 1.4016 | 14.0–18.0 | – | 0.12 | 1 | 0.04 | 1 | – | Quote |
| AISI 431 | S43100 1.4057 | 15.0–17.0 | 1.25–2.5 | 0.2 | 1 | 0.04 | 1 | – | Quote |
| AISI 434 | S43400 1.4113 | 16.0–18.0 | – | 0.12 | 1 | 0.04 | 1 | Mo 1 | Quote |
| AISI 439 | S43035 1.4510 | 17.75–18.75 | 0.5 | 0.07 | 1 | – | 1 | Ti 0.20+4(C+N) - 1.10 | Quote |
| AISI 440 A | S44002 | 16.0–18.0 | – | 0.75 | 1 | 0.04 | 1 | Mo 0.75 max | Quote |
| AISI 440 B | S44003 | 16.0–18.0 | – | 0.95 | 1 | 0.04 | 1 | Mo 0.75 max | Quote |
| AISI 440 C | S44004 1.4125 | 16.0–18.0 | – | 1.2 | 1 | 0.04 | 1 | Mo 0.75 max | Quote |
| AISI 442 | S44200 | 18.0–23.0 | – | 0.2 | 1 | 0.04 | 1 | – | Quote |
| AISI 446 | S44600 | 23.0–27.0 | – | 0.2 | 1.5 | 0.04 | 1 | N 0.25 max | Quote |
| AISI 501 | S50100 | 4.0–6.0 | – | 0.1 min | 1 | 0.04 | – | Mo 0.4–0.65 | Quote |
| AISI 502 | S50200 | 4.0–6.0 | – | 0.1 | 1 | 0.04 | – | Mo 0.4–0.65 | Quote |
| 17-4 PH Data sheet | S17400 1.4542 | 16.5 | 4 | 0.07 | 1 | 0.04 | – | Cu 4.0 Cb+Ta 0.3 | Quote |
| 17-7 PH | S17700 1.4568 | 17 | 7.1 | 0.09 | 1 | 0.04 | – | Al 1.0 | Quote |
| 13-8 Mo | S13800 1.4534 | 12.75 | 8.2 | 0.035 | 0.02 | – | 0.03 | Mo 2.15 Al 1.1 | Quote |
| 15-5 PH Data sheet | S15500 1.4545 | 15 | 4.6 | 0.04 | 0.28 | – | 0.6 | Cu 3.3 | Quote |
| 19-9 DX | 19 | 9 | 0.3 | – | – | – | – | Quote | |
| 904 L Data sheet | N08904 1.4539 | 19.0–23.0 | 23.0–28.0 | 0.02 | 2 | – | 1 | Mo 4–5 | Quote |
| Duplex 2205 Data sheet | S31803 / S32205 1.4462 | 22 | 5 | 0.03 | 1.5 | 0.04 | 1 | Cu 1 max Mo 3 | Quote |
| F51 | → see Duplex 2205 | ||||||||
| 21-4N | S63008 1.4871 | 22 | 4 | 0.576 | 10 | 0.05 | 0.25 | – | Quote |
02 · 182 alloys
Nickel, cobalt, molybdenum and tungsten alloys
Superalloys, corrosion-resistant and special alloys
| Alloy | UNS · W.Nr. | Ni | Cr | Co | Mo | W | C | Ti | Al | Cu | Fe | Other | Quote |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A 286 | S66286 1.4980 | 25.5 | 14.75 | – | 1.25 | – | 0.08 | 1.90 | 0.4 | – | bal. | V 0.25 | Quote |
| AL6X | N08366 | 23.5–25.5 | 20–22 | – | 6–7 | – | 0.03 | – | – | – | bal. | Mn 2.0 · Si 0.75 | Quote |
| Alloy 42 | → see Carpenter 42 | ||||||||||||
| Alnico 1 | 20.0 | – | 5.0 | – | – | – | – | 12.0 | – | 63.00 | – | Quote | |
| Alnico 2 | 17.0 | – | 12.5 | – | – | – | – | 10.0 | 6.00 | 54.00 | – | Quote | |
| Alnico 4 | 28.0 | – | 5.0 | – | – | – | – | 12.0 | – | 55.00 | – | Quote | |
| Alnico 5 | 14.0 | – | 24.0 | – | – | – | – | 8.0 | 3.00 | 50.00 | – | Quote | |
| Alumel | 95.0 | – | – | – | – | – | – | 1.0 | – | – | Mn 3.00 · Si 1.00 | Quote | |
| AM350 | S35000 | 4.3 | 16.5 | – | 2.75 | – | 0.10 | – | – | – | bal. | Mn 1.0 · Si 0.4 | Quote |
| Astroloy | 57.0 | 15.0 | 15.0 | 5.0 | – | 0.06 | 3.50 | 4.30 | – | 0.20 | – | Quote | |
| B 1900 | 63.0 | 8.0 | 10.0 | 6.0 | – | 0.10 | 1.00 | 6.00 | – | 0.35 | Ta 4.25 | Quote | |
| B 1910 | 62.5 | 10.0 | 10.0 | 3.25 | – | 0.09 | 1.00 | 6.00 | – | – | Ta 7.0 · B 0.01 · Zr 0.10 | Quote | |
| C 130 | 61.0 | 23.0 | 1.0 | 10.0 | – | 0.10 | 2.5 | 0.5 | – | – | – | Quote | |
| C 242 | 57.0 | 21.5 | 10.0 | 10.5 | – | 0.30 | 0.5 | 0.2 | – | 0.75 | – | Quote | |
| C 263 | N07263 2.4650 | 51.5 | 20.0 | 20.0 | 5.9 | – | – | 2.2 | 0.5 | – | 0.75 | – | Quote |
| 20CB3 | N08020 2.4660 | 32–38 | 19–21 | – | 2–3 | – | 0.07 | – | – | 3–4 | bal. | – | Quote |
| Carpenter 10 | 18.0 | 16.0 | – | – | – | 0.08 | – | – | – | bal. | – | Quote | |
| Carpenter 20 | 27.0 | 20.0 | – | 2.5 | – | – | – | – | 3.50 | 45.0 | – | Quote | |
| Carpenter 42 | K94100 1.3917 | 41.5 | – | – | – | – | 0.10 | – | – | – | bal. | – | Quote |
| Carpenter 49 | 48.5 | – | – | – | – | – | – | – | – | 51.0 | – | Quote | |
| Chlorimet 3 | 60 | 17–20 | – | 17–20 | – | 0.07 | – | – | – | 3.0 | – | Quote | |
| Chromel A | 80.0 | 20.0 | – | – | – | – | – | – | – | – | – | Quote | |
| Chromel AA | 70.0 | 20.0 | – | – | – | – | – | – | – | 10.0 | – | Quote | |
| Chromel C | 59.0 | 16.0 | – | – | – | – | – | – | – | 23.0 | Si 1.3 | Quote | |
| Chromel D | 36.0 | 18.5 | – | – | – | – | – | – | – | 44.0 | Si 1.5 | Quote | |
| Cupro Nickel 10% | C70600 2.0872 | 10.0 | – | – | – | – | – | – | – | 88.6 | 1.00 | Mn 0.4 | Quote |
| Cupro Nickel 20% | C71000 | 20.0 | – | – | – | – | – | – | – | 78.80 | 0.60 | Mn 0.6 | Quote |
| Cupro Nickel 30% | C71500 2.0882 | 30.0 | – | – | – | – | – | – | – | 68.90 | 0.50 | Mn 0.6 | Quote |
| D 979 | 45.0 | 15.0 | – | 3.70 | 3.70 | – | 3.00 | 1.00 | – | 27.0 | – | Quote | |
| Densalloy | 6.0 | – | – | – | 90.0 | – | – | – | 4.00 | – | – | Quote | |
| Discaloy | 26.0 | 13.5 | – | 2.75 | – | 0.08 | 1.60 | 0.35 | – | bal. | – | Quote | |
| Dumet | 28.0 | – | – | – | – | – | – | – | 27.00 | bal. | – | Quote | |
| Duranickel | N03301 | 94.0 | – | – | – | – | 0.15 | 0.50 | 4.50 | 0.05 | 0.15 | Mn 0.25 · Si 0.55 | Quote |
| E-Brite | S44627 | – | 23–27.5 | – | 0.75–1.5 | – | 0.005 | – | – | 0.20 | bal. | Cu + Ni 0.50 · Si 0.40 · Mn 0.40 | Quote |
| Elgiloy | R30003 | 15.0 | 20.0 | 40.0 | 7.00 | – | 0.15 | – | – | – | bal. | Mn 2.0 · Be 0.04 | Quote |
| ERE | 37.0 | 25.0 | – | 1.5 | – | 0.40 | – | – | – | 36.0 | – | Quote | |
| Ferralium | S32550 1.4507 | 4.5–6.5 | 24–27 | – | 2–4 | – | 0.08 | – | – | 1.5–2.5 | bal. | N 0.10–0.25 | Quote |
| GMR-235 | 63.0 | 15.5 | – | 5.25 | – | 0.10 | 2.00 | 3.00 | – | 10.00 | B 0.04 | Quote | |
| Greek Ascoloy | S41800 | 2.0 | 13.5 | – | – | 3.00 | 0.15 | – | – | – | bal. | – | Quote |
| Hastelloy A | 59.0 | – | – | 20.0 | – | 0.10 | – | – | – | 20.0 | – | Quote | |
| Hastelloy B | N10001 | 64.0 | – | – | 28.0 | – | 0.10 | – | – | – | 6.00 | – | Quote |
| Hastelloy C | N10002 | 57.0 | 16.0 | – | 17.0 | 4.5 | 0.15 | – | – | – | 5.55 | – | Quote |
| Hastelloy C-276 Data sheet | N10276 2.4819 | 56.0 | 15.5 | 2.5 max | 16.0 | 3.5 | 0.02 max | – | – | – | 5.5 | Mn 1.0 max | Quote |
| Hastelloy D | 85.0 | – | – | – | – | 0.10 | – | – | 4.00 | 1.00 | Si 10.0 | Quote | |
| Hastelloy F | 47.0 | 22.0 | 2.50 | 6.50 | 1.0 | – | – | – | – | – | Cb 2.0 | Quote | |
| Hastelloy G | N06007 2.4618 | 45.0 | 22.0 | 2.50 | 6.50 | 1.0 | 0.05 | – | – | 2.50 | – | Mn 2.0 · Cb + Ta 2.50 | Quote |
| Hastelloy N | N10003 | 71.0 | 7.0 | – | 16.5 | – | 0.06 | – | 0.50 | – | 5.0 | – | Quote |
| Hastelloy R | 65.0 | 15.5 | 1.50 | 5.0 | – | 0.10 | 2.50 | 2.25 | – | 7.0 | – | Quote | |
| Hastelloy S | N06635 | 68.7 | 15.5 | – | 15.5 | – | – | – | 0.2 | – | 1.0 | – | Quote |
| Hastelloy W | N10004 | 60.0 | 5.0 | 2.50 | 25.0 | – | 0.12 | – | – | – | 5.5 | V 0.60 | Quote |
| Hastelloy X | N06002 2.4665 | 45.0 | 22.0 | 1.5 | 9.0 | 0.60 | 0.10 | – | – | – | bal. | – | Quote |
| HOM-3 | 45 | 26 | 3 | 3 | 3 | 0.45 | – | – | – | bal. | – | Quote | |
| HS-1 | R30001 | – | 30.0 | 55.0 | – | 12.0 | 2.50 | – | – | – | – | – | Quote |
| HS-3 | – | 31.0 | 50.0 | – | 12.5 | 2.50 | – | – | – | 3.0 | – | Quote | |
| HS-4 | 3.0 | 30.0 | 51.0 | – | 14.0 | – | – | – | – | 3.0 | – | Quote | |
| HS-6 | R30006 | 3.0 | 30.0 | 56.0 | 1.5 | 5.0 | – | – | – | – | 3.0 | – | Quote |
| HS-12 | R30012 | 3.0 | 31.0 | 56.0 | – | 8.0 | – | – | – | – | 2.0 | – | Quote |
| HS-19 | 3.0 | 31.0 | 53.0 | – | 10.0 | – | – | – | – | 3.0 | – | Quote | |
| HS-21 | R30021 | 2.5 | 27.0 | 62.0 | 5.5 | – | – | – | – | – | 2.0 | – | Quote |
| HS-23 | 2.0 | 26.0 | 66.0 | – | 5.0 | 0.40 | – | – | – | 2.0 | – | Quote | |
| HS-25 (L 605) | R30605 2.4964 | 10.0 | 20.0 | 50.0 | 1.0 | 15.0 | – | – | – | – | 3.0 | – | Quote |
| HS-27 | 35.0 | 26.0 | 30.0 | 6.0 | – | – | – | – | – | 2.0 | – | Quote | |
| HS-30 | 15.0 | 26.0 | 51.0 | 6.0 | – | – | – | – | – | 2.0 | – | Quote | |
| HS-31 | R30031 | 10.5 | 26.0 | 55.0 | – | 7.5 | – | – | – | – | 2.0 | – | Quote |
| HS-151 | 1.0 | 20.0 | 65.0 | – | 13.0 | 0.50 | – | – | – | 2.0 | – | Quote | |
| HS-188 | R30188 2.4683 | 22.0 | 22.0 | 36.0 | – | 14.0 | 0.10 | – | – | – | 3.0 | – | Quote |
| HS Star J | 2.5 | 35.0 | 40.0 | – | 20.0 | 2.4 | – | – | – | 3.0 | B 0.2 | Quote | |
| Hypernick | 50.0 | – | – | – | – | – | – | – | – | 50.0 | – | Quote | |
| Hy Mu 80 | 80.0 | – | – | 4.0 | – | – | – | – | – | 16.0 | – | Quote | |
| Illium D | – | 27.0 | 65.0 | 4.5 | 1.0 | 0.20 | – | – | – | 1.0 | – | Quote | |
| Illium G | 57.0 | 22.5 | – | 6.4 | – | – | – | – | 6.5 | 6.5 | – | Quote | |
| Illium R | 64.0 | 22.0 | – | 5.0 | – | – | – | – | 2.5 | 6.0 | – | Quote | |
| Illium X | 1.0 | 28.5 | 52.0 | – | 15.0 | 0.85 | – | – | – | 2.0 | Mn 0.25 · Si 0.40 | Quote | |
| Illium 98 | 55.0 | 28.0 | – | 8.0 | – | 0.05 | – | – | 5.0 | – | – | Quote | |
| IN 100 | 60.0 | 10.0 | 15.0 | 3.0 | – | – | 5.00 | 5.50 | – | – | V 1.0 | Quote | |
| IN 102 | 68.0 | 15.0 | 3.0 | 3.0 | 3.0 | 0.06 | 0.50 | 0.50 | – | 7.0 | Cb 3.0 | Quote | |
| Incoloy 800 | N08800 1.4876 | 32.0 | 20.5 | – | – | – | 0.10 | 0.40 | 0.40 | – | 46.0 | – | Quote |
| Incoloy 801 | N08801 | 32.0 | 20.5 | – | – | – | – | 1.10 | – | – | 45.0 | – | Quote |
| Incoloy 802 | 32.5 | 21.0 | – | – | – | 0.35 | 0.75 | 0.60 | – | 45.0 | – | Quote | |
| Incoloy 825 | N08825 2.4858 | 42.0 | 21.5 | – | 3.0 | – | 0.05 | 1.00 | 0.20 | 2.0 | bal. | – | Quote |
| Incoloy 840 | 21.0 | 19.0 | – | – | – | 0.03 | – | – | – | 58.0 | – | Quote | |
| Incoloy 901 | N09901 2.4662 | 42.5 | 12.5 | – | 6.0 | – | 0.05 | 2.70 | 0.35 | 0.1 | 34.0 | – | Quote |
| Inconel 600 | N06600 2.4816 | 75.5 | 15.5 | – | – | – | 0.04 | – | – | 0.1 | 8.0 | – | Quote |
| Inconel 601 | N06601 2.4851 | 60.5 | 23.0 | – | – | – | 0.05 | – | 1.35 | 0.5 | 14.0 | – | Quote |
| Inconel 617 | N06617 2.4663 | 54.0 | 22.0 | 12.5 | 9.0 | – | 0.07 | – | 1.0 | – | – | – | Quote |
| Inconel 625 Data sheet | N06625 2.4856 | 61.0 | 20.5 | – | 9.0 | – | 0.05 | – | – | – | 2.5 | Cb 4.02 | Quote |
| Inconel 700 | 46.0 | 15.0 | 28.5 | 3.75 | – | – | 2.20 | 3.0 | – | 0.5 | – | Quote | |
| Inconel 702 | 79.5 | 16.0 | – | – | – | 0.05 | 0.50 | 3.50 | 0.25 | 1.0 | – | Quote | |
| Inconel 713 | 71.0 | 13.4 | 1.00 | 4.5 | – | 0.12 | 1.00 | 6.20 | – | 2.5 | – | Quote | |
| Inconel 713LC | 72.0 | 13.0 | – | 4.5 | – | 0.05 | 0.60 | 6.00 | – | 1.0 | Cb 2.25 | Quote | |
| Inconel 718 Data sheet | N07718 2.4668 | 52.5 | 19.0 | – | 3.05 | – | 0.04 | 0.90 | 0.50 | 0.15 | 18.5 | Cb + Ta 5.13 | Quote |
| Inconel 721 | 71.0 | 16.0 | – | – | – | 0.04 | 3.50 | – | 0.10 | 7.0 | Mn 2.25 | Quote | |
| Inconel 722 | 75.0 | 15.5 | – | – | – | 0.04 | 2.40 | 0.70 | 0.10 | 7.0 | – | Quote | |
| Inconel 738 | 61.0 | 16.0 | 8.5 | 1.7 | 2.6 | 0.17 | 3.40 | 3.40 | – | – | Cb 1.9 · Ta 1.7 | Quote | |
| Inconel 750 | N07750 2.4669 | 73.0 | 15.5 | – | – | – | 0.04 | 2.50 | 0.70 | 0.50 | 7.0 | Cb + Ta 0.95 | Quote |
| Inconel 751 | N07751 | 72.5 | 15.5 | – | – | – | 0.05 | 2.50 | 1.20 | 0.50 | 7.0 | Cb + Ta 1.0 | Quote |
| Inconel 901 | N09901 2.4662 | 42.5 | 12.5 | 1.0 | 6.0 | – | 0.05 | 2.70 | 0.4 | 0.1 | 34.0 | – | Quote |
| Invar | K93600 1.3912 | 36.0 | – | – | – | – | 0.18 | – | – | – | bal. | – | Quote |
| Jetalloy 1570 | 29.0 | 20.0 | 37.5 | – | 7 | 0.20 | 4.2 | – | – | – | – | Quote | |
| Kovar | K94610 1.3981 | 29.0 | – | 17.0 | – | – | – | – | – | – | 53.8 | Mn 0.20 | Quote |
| L 605 | → see HS-25 (L 605) | ||||||||||||
| M 252 | N07252 | 53.5 | 19.0 | 10.0 | 9.5 | – | 0.15 | 2.5 | 1.0 | – | 5.0 | – | Quote |
| Mallory 1000 | 6.0 | – | – | – | 90.0 | – | – | – | 4.0 | – | – | Quote | |
| Manuarite 36X | 35.0 | 25.0 | – | – | 2.0 | 0.40 | – | – | – | 36.0 | Nb (Cb) 2.0 | Quote | |
| Maraging 250 | K92890 1.6359 | 18.0 | – | 7.5 | 4.7 | – | 0.03 | 0.4 | 0.1 | – | bal. | – | Quote |
| Maraging 300 | K93120 1.6354 | 18.5 | – | 8.75 | 4.8 | – | 0.03 | 0.6 | 0.1 | – | bal. | – | Quote |
| MAR-M 200 | 60.0 | 9.0 | 10.0 | – | 12.5 | 0.15 | 2.0 | 5.0 | – | 0.3 | – | Quote | |
| MAR-M 302 | – | 21.5 | 57.0 | – | 10.0 | 0.85 | – | – | – | 0.8 | Ta 9.0 · Si 0.3 · Mn 0.1 · Zr 0.2 | Quote | |
| MAR-M 509 | 10.0 | 22.5 | 53.0 | – | 7.0 | 0.6 | 0.2 | – | – | 1.5 | Ta 3.5 · Si 0.4 · Mn 0.1 · Zr 0.5 | Quote | |
| Monel 400 (R) Data sheet | N04400 2.4360 | 66.0 | – | – | – | – | 0.12 | – | – | 31.0 | 2.0 | Mn 1.0 | Quote |
| Monel 404 | N04404 | 54.4 | – | – | – | – | 0.06 | – | 0.03 | 44.0 | 0.05 | – | Quote |
| Monel R405 | N04405 | 66.0 | – | – | – | – | 0.18 | – | – | 31.5 | 1.35 | Mn 1.0 | Quote |
| Monel K500 | N05500 2.4375 | 66.5 | – | – | – | – | 0.15 | 0.5 | 3.00 | 29.5 | 1.0 | Mn 0.75 | Quote |
| Monel 505 (S) | 64.0 | – | – | – | – | 0.80 | – | – | 29.0 | 2.0 | Mn 0.8 · Si 4.0 | Quote | |
| Monel 508 (H) | 64.0 | – | – | – | – | 0.10 | – | – | 30.0 | 1.5 | Si 3.2 | Quote | |
| Multimet | → see N 155 (Multimet) | ||||||||||||
| Mu Metal | 75.0 | 2.0 | – | – | – | – | – | – | 5.0 | 18.0 | – | Quote | |
| N 153 | 24.0 | 17.0 | 21.0 | 3.0 | 2.0 | 0.32 | – | – | – | bal. | Cb 1.0 | Quote | |
| N 155 (Multimet) | R30155 | 20.0 | 20.0 | 20.0 | 3.0 | 2.5 | 0.15 | – | – | – | bal. | Cb 1.0 | Quote |
| N 156 | 15.0 | 17.0 | 12.0 | 3.0 | 2.0 | 0.32 | – | – | – | bal. | Cb 1.0 | Quote | |
| NA 22H Data sheet | 2.4879 | 48.0 | 28.0 | – | – | 5.0 | 0.50 | – | – | – | bal. | Si 1.0 · Mn 1.3 | Quote |
| Nichrome | N06004 2.4867 | 60.0 | 15.0 | – | – | – | 0.40 | – | – | – | bal. | Si 1.4 | Quote |
| Nichrome V | N06003 2.4869 | 79.0 | 20.0 | – | – | – | 0.40 | – | – | – | bal. | Si 1.4 | Quote |
| Nickel 200 | N02200 2.4066 | 99.5 | – | – | – | – | 0.06 | – | – | 0.05 | 0.15 | Mn 0.2 | Quote |
| Nickel 202 | 95.5 | – | – | – | 3.80 | 0.03 | – | – | 0.02 | 0.05 | – | Quote | |
| Nickel 204 | 95.2 | – | 4.5 | – | – | 0.03 | – | – | 0.02 | – | – | Quote | |
| Nickel 210 | 95.6 | – | – | – | – | 0.80 | – | – | 0.50 | 0.50 | Si 1.6 | Quote | |
| Nickel 211 (D) | N02211 | 95.0 | – | – | – | – | 0.10 | – | – | 0.30 | 0.50 | Mn 4.5 | Quote |
| Nickel 213 (G) | 95.0 | – | – | – | – | 1.50 | – | – | 0.50 | 0.50 | Si 1.6 | Quote | |
| Nickel 305 (S) | 91.5 | – | – | – | – | 0.80 | – | – | 0.50 | 0.50 | Si 6.0 | Quote | |
| Nicrotung | 61.0 | 12.0 | 10.0 | – | 10 | 0.10 | 4.0 | 4.0 | – | – | – | Quote | |
| Ni-Hard | 4.5 | 2.0 | – | – | – | 3.00 | – | – | – | 89.5 | Mn 0.5 · Si 0.5 | Quote | |
| Nimonic 75 Data sheet | N06075 2.4951 | 77.6 | 20.5 | – | – | – | 0.10 | 0.35 | 0.2 | 0.05 | 0.50 | – | Quote |
| Nimonic 80 | 74.5 | 20.5 | – | – | – | 0.05 | 2.50 | 1.25 | 0.05 | 0.55 | – | Quote | |
| Nimonic 90 | N07090 2.4632 | 58.0 | 19.5 | 18.0 | – | – | 0.10 | 2.3 | 1.2 | – | – | – | Quote |
| Nimonic 95 | 50.0 | 20.0 | 20.0 | – | – | – | 3.0 | 2.0 | – | – | – | Quote | |
| Nimonic 100 | 50.0 | 19.0 | 20.0 | 5.0 | – | 0.10 | 3.0 | 2.0 | – | – | – | Quote | |
| Nimonic 105 | 2.4634 | 46.0 | 15.0 | 20.0 | 5.0 | – | 0.15 | 1.45 | 4.5 | – | – | – | Quote |
| Nimonic 115 | 42.5 | 15.0 | 15.0 | 3.5 | – | 0.20 | 4.0 | 5.0 | – | – | – | Quote | |
| Ni-Resist 1 Data sheet | 15.5 | 1.75 | – | – | – | 3.00 | – | – | 6.0 | bal. | Si 2.0 | Quote | |
| Ni-Resist 2 | 20.0 | 2.0 | – | – | – | 3.00 | – | – | – | bal. | Si 2.0 | Quote | |
| Ni-Resist 3 | 30.0 | 3.0 | – | – | – | 2.60 | – | – | – | bal. | Si 1.5 | Quote | |
| Ni-Resist 4 | 30.5 | 5.0 | – | – | – | 2.60 | – | – | – | bal. | Si 5.5 | Quote | |
| Ni-Resist 5 | 35.0 | 3.1 | – | – | – | 2.40 | – | – | – | bal. | Si 1.5 | Quote | |
| Nitronic 33 | S24000 | 2.25–3.75 | 17.0–19.0 | – | – | – | 0.08 | – | – | – | bal. | – | Quote |
| Nitronic 40 | S21900 | 5–7 | 18–20 | – | – | – | 0.08 | – | – | – | bal. | Mn 8–10 · Si 1.0 | Quote |
| Nitronic 50 | S20910 | 11.5–13.5 | 20.5–23.5 | – | 1.5–3 | – | 0.06 | – | – | – | bal. | Mn 4–6 · Si 1.0 | Quote |
| Nitronic 60 Data sheet | S21800 | 8–9 | 16–18 | – | – | – | 0.10 | – | – | – | bal. | Mn 7–9 · Si 3.5–4.5 | Quote |
| Ni-Span C | N09902 | 42.0 | 5.4 | – | – | – | 0.02 | 2.4 | 0.65 | 0.05 | bal. | – | Quote |
| Permalloy | 78.5 | – | – | – | – | – | – | – | – | 21.5 | – | Quote | |
| Permendur | – | – | 50.0 | – | – | – | – | – | – | 50.0 | – | Quote | |
| PWA 653 | → see WI 52 | ||||||||||||
| PWA 663 | → see B 1900 | ||||||||||||
| PWA 686 | 57.0 | 19.5 | 13.5 | 4.0 | – | 0.05 | 2.5 | 1.5 | – | 2.0 | – | Quote | |
| PWA 688 | → see Udimet 500 | ||||||||||||
| PWA 689 | → see Udimet 700 | ||||||||||||
| RA 330 | N08330 1.4886 | 35.0 | 19.0 | – | – | – | 0.06 | – | – | 0.5 | 43.0 | Mn 1.5 · Si 1.25 | Quote |
| RA 333 | N06333 | 45.0 | 25.0 | 3.0 | 3.0 | 3.0 | 0.05 | – | – | 0.5 | 18.0 | – | Quote |
| Remendur | – | – | 50.0 | – | – | – | – | – | – | bal. | V 5.0 | Quote | |
| René 41 | N07041 2.4973 | 55.5 | 19.0 | 11.0 | 10.0 | – | 0.09 | 3.2 | 1.6 | – | – | – | Quote |
| René 77 | 57.0 | 15.0 | 15.0 | 5.0 | – | 0.06 | 3.5 | 4.4 | – | – | – | Quote | |
| René 80 | 60.28 | 14.0 | 9.5 | 4.0 | 4.0 | 0.18 | 5.0 | 3.0 | – | – | – | Quote | |
| René 88 | 54.0 | 16.0 | 13.0 | 4.0 | 4.0 | – | 3.5 | 2.0 | – | 0.250 | – | Quote | |
| Rexalloy | – | 33.0 | 44.0 | – | 17.0 | 2.2 | – | – | – | 1.0 | – | Quote | |
| S-816 | R30816 | 20.0 | 20.0 | 43.0 | 4.0 | 4.0 | 0.38 | – | – | – | 4.0 | Mn 0.20 · Cb 4.0 | Quote |
| Sealmet | 42.0 | – | 5.0 | – | – | – | – | – | – | 53.0 | – | Quote | |
| SMO 254 Data sheet | S31254 1.4547 | 18.0 | 19.5 | – | 6.0 | – | – | – | – | 0.5 | 56.0 | – | Quote |
| Stellites | → see HS series (HS-1 … HS-188) | ||||||||||||
| Supertherm | 35.0 | 26.0 | 15.0 | – | 5.0 | 0.5 | – | – | – | bal. | Si 1.6 | Quote | |
| Thetalcy | 49.0 | 25.0 | 12.5 | 3.0 | 7.0 | – | – | – | – | 3.0 | – | Quote | |
| Ticonium | 30.0 | 25.0 | 30.0 | 6.0 | – | 0.06 | – | – | – | – | – | Quote | |
| Tophet A | 80.0 | 20.0 | – | – | – | – | – | – | – | – | – | Quote | |
| Tophet B | 70.0 | 20.0 | – | – | – | – | – | – | – | bal. | – | Quote | |
| Tophet C | 61.0 | 15.0 | – | – | – | – | – | 3.0 | – | bal. | – | Quote | |
| Tophet M | 65.0 | 30.0 | – | – | – | 5.00 | – | – | – | – | – | Quote | |
| Timken (16-15-6) | 15.0 | 16.0 | – | 6.0 | – | – | – | – | – | bal. | Mn 7.5 | Quote | |
| TZM Data sheet | R03630 | – | – | – | bal. | – | 0.015 | 0.5 | – | – | – | Zr 0.08 | Quote |
| Udimet 200 | → see Incoloy 901 | ||||||||||||
| Udimet 500 | 53.0 | 17.5 | 16.5 | 4.0 | – | 0.10 | 3.0 | 3.0 | – | 2.0 | – | Quote | |
| Udimet 520 | 56.0 | 19.0 | 12.0 | 6.0 | 1.0 | – | 3.0 | 2.0 | – | 1.0 | – | Quote | |
| Udimet 600 | 52.0 | 17.5 | 16.5 | 4.0 | – | – | 2.9 | 4.2 | – | 4.0 | – | Quote | |
| Udimet 700 | 52.0 | 15.0 | 18.5 | 4.0 | – | 0.07 | 3.5 | 4.2 | – | 1.0 | – | Quote | |
| Udimet 710 | 55.0 | 18.0 | 15.0 | 3.0 | 1.5 | 0.07 | 5.0 | 2.5 | – | – | – | Quote | |
| UMCo 50 Data sheet | 2.4778 | – | 28.0 | 52.0 | – | – | 0.1 | – | – | – | 20.0 | – | Quote |
| UMCo 51 | – | 28.0 | 50.0 | – | – | 0.27 | – | – | – | 20.0 | Cb 2.0 | Quote | |
| Vicalloy I | – | – | 52.0 | – | – | – | – | – | – | bal. | V 9.5 | Quote | |
| Vicalloy II | – | – | 51.7 | – | – | 0.02 | – | – | – | bal. | V 14.0 · Mn 0.30 | Quote | |
| Waspaloy Data sheet | N07001 2.4654 | 55.0 | 19.0 | 13.5 | 4.25 | – | 0.07 | 3.0 | 1.4 | – | 1.0 | – | Quote |
| Waspaloy (mod.) | 56.0 | 19.0 | 11.5 | 7.0 | – | 0.05 | 2.5 | 1.2 | – | 1.2 | – | Quote | |
| WI 52 | 1.0 | 21.0 | 64.0 | – | 11.0 | 0.45 | – | – | – | 0.6 | Mn 0.5 · Si 0.5 · Cb + Ta 2.0 | Quote | |
| Zircaloy-2 | R60802 | 0.05 | 0.1 | – | – | – | – | – | – | – | 0.12 | Sn 1.5 · Zr bal. | Quote |
| Z Nickel | → see Duranickel | ||||||||||||
03 · 17 alloys
Tool steels
Cold-work, air-hardening and water-hardening
| AISI | UNS · W.Nr. | C | Mn | Si | Cr | Ni | V | W | Mo | Co | Quote |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cold-work – oil-hardening | |||||||||||
| O1 | T31501 1.2510 | 0.90 | 1.00 | – | 0.50 | – | – | 0.50 | – | – | Quote |
| O2 | T31502 1.2842 | 0.90 | 1.60 | – | – | – | – | – | – | – | Quote |
| O6 | T31506 | 1.45 | – | 1.00 | – | – | – | – | 0.25 | – | Quote |
| O7 | T31507 | 1.20 | – | – | 0.75 | – | – | 1.75 | – | – | Quote |
| Medium-alloy – air-hardening | |||||||||||
| A2 | T30102 1.2363 | 1.00 | – | – | 5.00 | – | – | – | 1.00 | – | Quote |
| A3 | T30103 | 1.25 | – | – | 5.00 | – | 1.00 | – | 1.00 | – | Quote |
| A4 | T30104 | 1.00 | 2.00 | – | 1.00 | – | – | – | 1.00 | – | Quote |
| A5 | T30105 | 1.00 | 3.00 | – | 1.00 | – | – | – | 1.00 | – | Quote |
| A6 | T30106 | 0.70 | 2.00 | – | 1.00 | – | – | – | 1.00 | – | Quote |
| A7 | T30107 | 2.25 | – | – | 5.25 | – | 4.75 | 1.00 | 1.00 | – | Quote |
| A8 | T30108 | 0.55 | – | – | 5.00 | – | – | 1.25 | 1.25 | – | Quote |
| A9 | T30109 | 0.50 | – | – | 5.00 | 1.50 | 1.00 | – | 1.40 | – | Quote |
| A10 | T30110 | 1.35 | 1.80 | 1.25 | – | 1.50 | – | – | 1.50 | – | Quote |
| Water-hardening | |||||||||||
| W1 | T72301 | 0.60–1.40 | – | – | – | – | – | – | – | – | Quote |
| W2 | T72302 | 0.60–1.40 | – | – | – | – | 0.25 | – | – | – | Quote |
| W4 | 0.60–1.40 | – | – | 0.25 | – | – | – | – | – | Quote | |
| W5 | T72305 | 1.10 | – | – | 0.50 | – | – | – | – | – | Quote |
04 · 23 alloys
Tool steels
High-carbon chromium and hot-work types
| AISI | UNS · W.Nr. | C | Cr | V | W | Mo | Co | Quote |
|---|---|---|---|---|---|---|---|---|
| High-carbon – chromium types | ||||||||
| D1 | 1.00 | 12.00 | – | – | 1.00 | – | Quote | |
| D2 | T30402 1.2379 | 1.50 | 12.00 | – | – | 1.00 | – | Quote |
| D3 | T30403 1.2080 | 2.25 | 12.00 | – | – | – | – | Quote |
| D4 | T30404 | 2.25 | 12.00 | – | – | 1.00 | – | Quote |
| D5 | T30405 | 1.50 | 12.00 | – | – | 1.00 | 3.00 | Quote |
| D7 | T30407 | 2.35 | 12.00 | 4.00 | – | 1.00 | – | Quote |
| Hot-work – chromium types | ||||||||
| H10 | T20810 1.2365 | 0.40 | 3.33 | 0.40 | – | 2.50 | – | Quote |
| H11 Data sheet | T20811 1.2343 | 0.35 | 5.00 | 0.40 | – | 1.50 | – | Quote |
| H12 | T20812 1.2606 | 0.35 | 5.00 | 0.40 | 1.50 | 1.50 | – | Quote |
| H13 Data sheet | T20813 1.2344 | 0.35 | 5.00 | 1.00 | – | 1.50 | – | Quote |
| H14 | T20814 | 0.40 | 5.00 | – | 5.00 | – | – | Quote |
| H16 | 0.55 | 7.00 | – | 7.00 | – | – | Quote | |
| H19 | T20819 | 0.40 | 4.25 | 2.00 | 4.25 | – | 4.25 | Quote |
| Hot-work – tungsten types | ||||||||
| H20 | 0.35 | 2.00 | – | 9.00 | – | – | Quote | |
| H21 | T20821 1.2581 | 0.35 | 3.50 | – | 9.00 | – | – | Quote |
| H22 | T20822 | 0.35 | 2.00 | – | 11.00 | – | – | Quote |
| H23 | T20823 | 0.30 | 12.00 | – | 12.00 | – | – | Quote |
| H24 | T20824 | 0.45 | 3.00 | – | 15.00 | – | – | Quote |
| H25 | T20825 | 0.25 | 4.00 | – | 15.00 | – | – | Quote |
| H26 | T20826 | 0.50 | 4.00 | 1.00 | 18.00 | – | – | Quote |
| Hot-work – molybdenum types | ||||||||
| H41 | T20841 | 0.65 | 4.00 | 1.00 | 1.50 | 8.00 | – | Quote |
| H42 | T20842 | 0.60 | 4.00 | 2.00 | 6.00 | 5.00 | – | Quote |
| H43 | T20843 | 0.55 | 4.00 | 2.00 | – | 8.00 | – | Quote |
05 · 27 alloys
High-speed steels (HSS)
Tungsten and molybdenum types
| AISI | UNS · W.Nr. | C | Cr | V | W | Mo | Co | Quote |
|---|---|---|---|---|---|---|---|---|
| High-speed – tungsten types | ||||||||
| T1 Data sheet | T12001 1.3355 | 0.70 | 4.00 | 1.00 | 18.00 | – | – | Quote |
| T2 | T12002 | 0.80 | 4.00 | 2.00 | 18.00 | – | – | Quote |
| T4 | T12004 1.3255 | 0.75 | 4.00 | 1.00 | 18.00 | – | 5.00 | Quote |
| T5 | T12005 | 0.80 | 4.00 | 2.00 | 18.00 | – | 8.00 | Quote |
| T6 | T12006 | 0.80 | 4.50 | 1.50 | 20.00 | – | 12.00 | Quote |
| T7 | 0.75 | 4.00 | 2.00 | 14.00 | – | – | Quote | |
| T8 | T12008 | 0.75 | 4.00 | 2.00 | 14.00 | – | 5.00 | Quote |
| T9 | 1.20 | 4.00 | 4.00 | 18.00 | – | – | Quote | |
| T15 Data sheet | T12015 1.3202 | 1.50 | 4.00 | 5.00 | 12.00 | – | 5.00 | Quote |
| High-speed – molybdenum types | ||||||||
| M1 | T11301 1.3346 | 0.80 | 4.00 | 1.00 | 1.50 | 8.00 | – | Quote |
| M2 Data sheet | T11302 1.3343 | 0.85 | 4.00 | 2.00 | 6.00 | 5.00 | – | Quote |
| M3 (Class 1) | T11313 | 1.05 | 4.00 | 2.40 | 6.00 | 5.00 | – | Quote |
| M3 (Class 2) | T11323 | 1.20 | 4.00 | 3.00 | 6.00 | 5.00 | – | Quote |
| M4 | T11304 | 1.30 | 4.00 | 4.00 | 5.50 | 4.50 | – | Quote |
| M6 | 0.80 | 4.00 | 1.50 | 4.00 | 5.00 | 12.00 | Quote | |
| M7 | T11307 1.3348 | 1.00 | 4.00 | 2.00 | 1.75 | 8.75 | – | Quote |
| M10 | T11310 | 0.90 | 4.00 | 2.00 | – | 8.00 | – | Quote |
| M15 | 1.50 | 4.00 | 5.00 | 6.50 | 3.50 | 5.00 | Quote | |
| M30 | T11330 | 0.80 | 4.00 | 1.25 | 2.00 | 8.00 | 5.00 | Quote |
| M33 | T11333 | 0.90 | 4.00 | 1.15 | 1.50 | 9.50 | 8.00 | Quote |
| M34 | T11334 | 0.90 | 4.00 | 2.00 | 2.00 | 8.00 | 8.00 | Quote |
| M35 Data sheet | 1.3243 | 0.80 | 4.00 | 2.00 | 6.00 | 5.00 | 5.00 | Quote |
| M36 | T11336 | 0.80 | 4.00 | 2.00 | 6.00 | 5.00 | 8.00 | Quote |
| M41 | T11341 | 1.10 | 4.25 | 2.00 | 6.75 | 3.75 | 5.00 | Quote |
| M42 | T11342 1.3247 | 1.10 | 3.75 | 1.15 | 1.50 | 9.50 | 8.00 | Quote |
| M43 | T11343 | 1.25 | 3.75 | 2.00 | 1.75 | 8.75 | 8.25 | Quote |
| M44 | T11344 | 1.15 | 4.25 | 2.25 | 5.25 | 6.25 | 12.00 | Quote |
06 · 24 alloys
Titanium and titanium alloys
Balance Ti unless stated
| Alloy | UNS · W.Nr. | Ti | Al | V | Sn | Mo | Other | Quote |
|---|---|---|---|---|---|---|---|---|
| C.P. Data sheet | ≥ 99.0 | – | – | – | – | – | Quote | |
| Ti Pd Data sheet Ti-0.2Pd | bal. | – | – | – | – | Pd 0.20 | Quote | |
| 2 Ni | bal. | – | – | – | – | Ni 2 | Quote | |
| 2.5 Cu Ti-2.5Cu | bal. | – | – | – | – | Cu 2.5 | Quote | |
| 8 Mn Ti-8Mn | R56080 | bal. | – | – | – | – | Mn 8 | Quote |
| 3-2.5 Ti-3Al-2.5V | R56320 3.7195 | bal. | 3 | 2.5 | – | – | – | Quote |
| 3-8-6-4-4 Ti-3Al-8V-6Cr-4Mo-4Zr | R58640 | bal. | 3 | 8 | – | 4 | Cr 6 · Zr 4 | Quote |
| 4-3-1 Ti-4Al-3Mo-1V | bal. | 4 | 1 | – | 3 | – | Quote | |
| 4-4 Ti-4Al-4Mn | bal. | 4 | – | – | – | Mn 4 | Quote | |
| 4-4-2-.5 | bal. | 4 | – | 2 | 4 | Si 0.5 | Quote | |
| 4-4-4-.6 | bal. | 4 | – | 4 | 4 | Si 0.5 | Quote | |
| 5-2.5 Ti-5Al-2.5Sn | R54520 3.7115 | bal. | 5 | – | 2.5 | – | – | Quote |
| 5-6-2-1-.25 | bal. | 5 | – | 6 | 1 | Si 0.25 · Zr 2 | Quote | |
| 6-2-1-1 Ti-6Al-2Nb-1Ta-0.8Mo | R56210 | bal. | 6 | – | – | 1 | Cb 2 · Ta 1 | Quote |
| 6-2-4-2 Ti-6Al-2Sn-4Zr-2Mo | R54620 | bal. | 6 | – | 2 | 2 | Zr 4 | Quote |
| 6-2-4-6 Ti-6Al-2Sn-4Zr-6Mo | R56260 | bal. | 6 | – | 2 | 6 | Zr 4 | Quote |
| 6-4 Data sheet Ti-6Al-4V | R56400 3.7165 | bal. | 6 | 4 | – | – | – | Quote |
| 6-5-.5-2.5 | bal. | 6 | – | – | 0.5 | Si 0.25 · Zr 5 | Quote | |
| 6-6-2 Ti-6Al-6V-2Sn | R56620 | bal. | 6 | 6 | 2 | – | – | Quote |
| 7-4 Ti-7Al-4Mo | R56740 | bal. | 7 | – | – | 4 | – | Quote |
| 8-1-1 Ti-8Al-1Mo-1V | R54810 | bal. | 8 | 1 | – | 1 | – | Quote |
| 11-5-2.3-1-.25 | bal. | 2.3 | – | 11 | 1 | Si 0.25 · Zr 5 | Quote | |
| 13-11-3 Ti-13V-11Cr-3Al | R58010 | bal. | 3 | 13 | – | – | Cr 11 | Quote |
| T-17 Ti-5Al-2Sn-2Zr-4Mo-4Cr | R58650 | 83 | 5 | – | 2 | 4 | Zr 2 · Cr 4 | Quote |
07 · 7 alloys
Titanium alloys – Russian grades
VT / BT / OT
| Grade | UNS · W.Nr. | Ti | Al | V | Sn | Mn | Mo | Fe | C | Cr | Si | Quote |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VT-6 | bal. | 6 | 4 | – | – | – | – | – | – | 0.15 | Quote | |
| VT-10 | bal. | – | – | – | – | – | 0.3 | 0.05 | – | 0.15 | Quote | |
| BT1-0 | bal. | 0.5 | – | – | – | – | 0.25 | 0.07 | – | 0.15 | Quote | |
| BT1-2 | bal. | – | – | – | – | – | 1.5 | 0.1 | – | 0.15 | Quote | |
| OT4-0 | bal. | 1.0* | – | – | 1 | – | 0.3 | 0.1 | – | 0.12 | Quote | |
| OT4-1 | bal. | 2 | – | – | 1.5 | – | 0.3 | 0.1 | – | 0.12 | Quote | |
| OT4 | bal. | 4.5 | – | – | 1.5 | – | 0.3 | 0.1 | – | 0.12 | Quote |
* = maximum value
How to read the table
- Nominal or typical values in weight %. Ranges are analysis limits; “max” and “min” are maximum and minimum values; “bal.” is the base element. The actual composition of each lot is defined only by the material certificate.
- UNS and W.Nr. (EN material number / Werkstoff-Nr.): reference equivalents, given only where certain. Equivalent materials from different standards may differ slightly in their analysis limits.
- Alloys marked “Data sheet” have a full page with detailed composition, properties, applications and the forms we buy.
- Cb (columbium) is the former American name for niobium (Nb).
→ · Quotation
Do you have one of these alloys to sell?
Tell us the alloy, form (scrap, turnings, bars…), quantity and pickup area: we reply with a fast quotation. If you don’t know the exact analysis, a photo or the certificate will do when we get back to you.
Tel +41 91 9856992
Mobile +39 3494906948
contacts@giulianimetalli.com