TABLE DE RÉFÉRENCE · 332 ALLIAGES
Composition chimique des alliages
L’analyse nominale des alliages que nous traitons chaque jour : aciers inoxydables, superalliages de nickel et de cobalt, aciers à outils et rapides, titane. Recherchez par nom commercial, nuance AISI, numéro UNS ou Werkstoff-Nr.
/
332 alliages
Valeurs nominales en % massique : voir « Comment lire le tableau » en bas de page.
Envoyez-nous la nuance et l’analyse de votre matériau : nous l’identifions.
Demander un devis →01 · 52 alliages
Aciers inoxydables
Fe : reste
| Alliage | UNS · W.Nr. | Cr | Ni | C max | Mn max | P max | Si max | Autres | Devis |
|---|---|---|---|---|---|---|---|---|---|
| AISI 201 | S20100 1.4372 | 16–18 | 3,5–5,5 | 0,15 | 7,5 | 0,06 | 1,0 | N 0,5 max | Devis |
| AISI 202 | S20200 1.4373 | 17–19 | 4–6 | 0,15 | 10 | 0,06 | 1 | N 0,5 max | Devis |
| AISI 204 | 18 | 5 | 0,07 | 9 | – | 0,5 | N 0,2 | Devis | |
| AISI 205 | S20500 | 17 | 1,4 | 0,18 | 15 | 0,03 | 0,4 | N 0,35 | Devis |
| AISI 301 | S30100 1.4310 | 16–18 | 6–8 | 0,15 | 2 | 0,045 | 1 | – | Devis |
| AISI 302 | S30200 | 17–19 | 8–10 | 0,15 | 2 | 0,045 | 1 | – | Devis |
| AISI 303 | S30300 1.4305 | 17–19 | 8–10 | 0,15 | 2 | 0,2 | 1 | S 0,15 min | Devis |
| AISI 303 SE | S30323 | 17–19 | 8–10 | 0,15 | 2 | 0,2 | 1 | Se 0,15 min | Devis |
| AISI 304 Fiche | S30400 1.4301 | 18–20 | 8–12 | 0,08 | 2 | 0,045 | 1 | – | Devis |
| AISI 304 L | S30403 1.4307 | 18–20 | 8–12 | 0,03 | 2 | 0,045 | 1 | – | Devis |
| AISI 305 | S30500 1.4303 | 17–19 | 10–13 | 0,12 | 2 | 0,045 | 1 | – | Devis |
| AISI 308 | S30800 | 19–21 | 10–12 | 0,08 | 2 | 0,045 | 1 | – | Devis |
| AISI 309 | S30900 | 22–24 | 12–15 | 0,2 | 2 | 0,045 | 1 | – | Devis |
| AISI 309 S | S30908 1.4833 | 22–24 | 12–15 | 0,08 | 2 | 0,045 | 1 | – | Devis |
| AISI 310 (24/20) | S31000 | 24–26 | 19–22 | 0,25 | 2 | 0,045 | 1,5 | – | Devis |
| AISI 310 S | S31008 1.4845 | 24–26 | 19–22 | 0,08 | 2 | 0,045 | 1,5 | – | Devis |
| AISI 311 | 18–20 | 24–26 | 0,25 | 2 | 0,045 | 3 | – | Devis | |
| AISI 312 | 23–26 | 8–11 | 0,25 | 2 | 0,045 | 3 | – | Devis | |
| AISI 316 Fiche | S31600 1.4401 | 16–18 | 10–14 | 0,08 | 2 | 0,045 | 1 | Mo 2,0–3,0 | Devis |
| AISI 316 L | S31603 1.4404 | 16–18 | 10–14 | 0,03 | 2 | 0,045 | 1 | Mo 2,0–3,0 | Devis |
| AISI 317 | S31700 | 18–20 | 11–15 | 0,08 | 2 | 0,045 | 1 | Mo 3,0–4,0 | Devis |
| AISI 321 | S32100 1.4541 | 17–19 | 9–12 | 0,08 | 2 | 0,045 | 1 | Ti 5xC min | Devis |
| AISI 329 | S32900 1.4460 | 23–28 | 5 | 0,2 | 2 | – | – | Mo 1–1,5 | Devis |
| AISI 330 | 14–16 | 33–36 | 0,25 | 2 | 0,045 | 0,75 | – | Devis | |
| 35/15 | → voir AISI 330 | ||||||||
| AISI 347 | S34700 1.4550 | 17–19 | 9–13 | 0,08 | 2 | 0,045 | 1 | Cb-Ta 10xC min | Devis |
| AISI 348 | S34800 | 17–19 | 9–13 | 0,08 | 2 | 0,045 | 1 | Cb-Ta 10xC min · Ta 0,10 max · Co 0,10 max | Devis |
| AISI 403 | S40300 | 11,5–13 | – | 0,15 | 1 | 0,04 | 0,5 | – | Devis |
| AISI 405 | S40500 1.4002 | 11,5–14,5 | – | 0,08 | 1 | 0,04 | 1 | Al 0,10–0,30 | Devis |
| AISI 409 | S40900 1.4512 | 10,5–13,5 | – | 0,05 | 0,55 | 0,045 | 0,5 | Al 0,5 Ti 0,45 | Devis |
| AISI 410 | S41000 1.4006 | 11,5–13,5 | – | 0,15 | 1 | 0,04 | 1 | – | Devis |
| AISI 414 | S41400 | 11,5–13,5 | 1,25–2,5 | 0,15 | 1 | 0,04 | 1 | – | Devis |
| AISI 416 | S41600 1.4005 | 12,0–14,0 | – | 0,15 | 1,25 | 0,06 | 1 | S 0,15 min | Devis |
| AISI 420 | S42000 1.4021 | 12,0–14,0 | – | 0,15 min | 1 | 0,04 | 1 | – | Devis |
| AISI 430 | S43000 1.4016 | 14,0–18,0 | – | 0,12 | 1 | 0,04 | 1 | – | Devis |
| AISI 431 | S43100 1.4057 | 15,0–17,0 | 1,25–2,5 | 0,2 | 1 | 0,04 | 1 | – | Devis |
| AISI 434 | S43400 1.4113 | 16,0–18,0 | – | 0,12 | 1 | 0,04 | 1 | Mo 1 | Devis |
| AISI 439 | S43035 1.4510 | 17,75–18,75 | 0,5 | 0,07 | 1 | – | 1 | Ti 0,20+4(C+N) - 1,10 | Devis |
| AISI 440 A | S44002 | 16,0–18,0 | – | 0,75 | 1 | 0,04 | 1 | Mo 0,75 max | Devis |
| AISI 440 B | S44003 | 16,0–18,0 | – | 0,95 | 1 | 0,04 | 1 | Mo 0,75 max | Devis |
| AISI 440 C | S44004 1.4125 | 16,0–18,0 | – | 1,2 | 1 | 0,04 | 1 | Mo 0,75 max | Devis |
| AISI 442 | S44200 | 18,0–23,0 | – | 0,2 | 1 | 0,04 | 1 | – | Devis |
| AISI 446 | S44600 | 23,0–27,0 | – | 0,2 | 1,5 | 0,04 | 1 | N 0,25 max | Devis |
| AISI 501 | S50100 | 4,0–6,0 | – | 0,1 min | 1 | 0,04 | – | Mo 0,4–0,65 | Devis |
| AISI 502 | S50200 | 4,0–6,0 | – | 0,1 | 1 | 0,04 | – | Mo 0,4–0,65 | Devis |
| 17-4 PH Fiche | S17400 1.4542 | 16,5 | 4 | 0,07 | 1 | 0,04 | – | Cu 4,0 Cb+Ta 0,3 | Devis |
| 17-7 PH | S17700 1.4568 | 17 | 7,1 | 0,09 | 1 | 0,04 | – | Al 1,0 | Devis |
| 13-8 Mo | S13800 1.4534 | 12,75 | 8,2 | 0,035 | 0,02 | – | 0,03 | Mo 2,15 Al 1,1 | Devis |
| 15-5 PH Fiche | S15500 1.4545 | 15 | 4,6 | 0,04 | 0,28 | – | 0,6 | Cu 3,3 | Devis |
| 19-9 DX | 19 | 9 | 0,3 | – | – | – | – | Devis | |
| 904 L Fiche | N08904 1.4539 | 19,0–23,0 | 23,0–28,0 | 0,02 | 2 | – | 1 | Mo 4–5 | Devis |
| Duplex 2205 Fiche | S31803 / S32205 1.4462 | 22 | 5 | 0,03 | 1,5 | 0,04 | 1 | Cu 1 max Mo 3 | Devis |
| F51 | → voir Duplex 2205 | ||||||||
| 21-4N | S63008 1.4871 | 22 | 4 | 0,576 | 10 | 0,05 | 0,25 | – | Devis |
02 · 182 alliages
Alliages de nickel, cobalt, molybdène et tungstène
Superalliages, alliages résistants à la corrosion et alliages spéciaux
| Alliage | UNS · W.Nr. | Ni | Cr | Co | Mo | W | C | Ti | Al | Cu | Fe | Autres | Devis |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A 286 | S66286 1.4980 | 25,5 | 14,75 | – | 1,25 | – | 0,08 | 1,90 | 0,4 | – | reste | V 0,25 | Devis |
| AL6X | N08366 | 23,5–25,5 | 20–22 | – | 6–7 | – | 0,03 | – | – | – | reste | Mn 2,0 · Si 0,75 | Devis |
| Alloy 42 | → voir Carpenter 42 | ||||||||||||
| Alnico 1 | 20,0 | – | 5,0 | – | – | – | – | 12,0 | – | 63,00 | – | Devis | |
| Alnico 2 | 17,0 | – | 12,5 | – | – | – | – | 10,0 | 6,00 | 54,00 | – | Devis | |
| Alnico 4 | 28,0 | – | 5,0 | – | – | – | – | 12,0 | – | 55,00 | – | Devis | |
| Alnico 5 | 14,0 | – | 24,0 | – | – | – | – | 8,0 | 3,00 | 50,00 | – | Devis | |
| Alumel | 95,0 | – | – | – | – | – | – | 1,0 | – | – | Mn 3,00 · Si 1,00 | Devis | |
| AM350 | S35000 | 4,3 | 16,5 | – | 2,75 | – | 0,10 | – | – | – | reste | Mn 1,0 · Si 0,4 | Devis |
| Astroloy | 57,0 | 15,0 | 15,0 | 5,0 | – | 0,06 | 3,50 | 4,30 | – | 0,20 | – | Devis | |
| B 1900 | 63,0 | 8,0 | 10,0 | 6,0 | – | 0,10 | 1,00 | 6,00 | – | 0,35 | Ta 4,25 | Devis | |
| B 1910 | 62,5 | 10,0 | 10,0 | 3,25 | – | 0,09 | 1,00 | 6,00 | – | – | Ta 7,0 · B 0,01 · Zr 0,10 | Devis | |
| C 130 | 61,0 | 23,0 | 1,0 | 10,0 | – | 0,10 | 2,5 | 0,5 | – | – | – | Devis | |
| C 242 | 57,0 | 21,5 | 10,0 | 10,5 | – | 0,30 | 0,5 | 0,2 | – | 0,75 | – | Devis | |
| C 263 | N07263 2.4650 | 51,5 | 20,0 | 20,0 | 5,9 | – | – | 2,2 | 0,5 | – | 0,75 | – | Devis |
| 20CB3 | N08020 2.4660 | 32–38 | 19–21 | – | 2–3 | – | 0,07 | – | – | 3–4 | reste | – | Devis |
| Carpenter 10 | 18,0 | 16,0 | – | – | – | 0,08 | – | – | – | reste | – | Devis | |
| Carpenter 20 | 27,0 | 20,0 | – | 2,5 | – | – | – | – | 3,50 | 45,0 | – | Devis | |
| Carpenter 42 | K94100 1.3917 | 41,5 | – | – | – | – | 0,10 | – | – | – | reste | – | Devis |
| Carpenter 49 | 48,5 | – | – | – | – | – | – | – | – | 51,0 | – | Devis | |
| Chlorimet 3 | 60 | 17–20 | – | 17–20 | – | 0,07 | – | – | – | 3,0 | – | Devis | |
| Chromel A | 80,0 | 20,0 | – | – | – | – | – | – | – | – | – | Devis | |
| Chromel AA | 70,0 | 20,0 | – | – | – | – | – | – | – | 10,0 | – | Devis | |
| Chromel C | 59,0 | 16,0 | – | – | – | – | – | – | – | 23,0 | Si 1,3 | Devis | |
| Chromel D | 36,0 | 18,5 | – | – | – | – | – | – | – | 44,0 | Si 1,5 | Devis | |
| Cupro Nickel 10% | C70600 2.0872 | 10,0 | – | – | – | – | – | – | – | 88,6 | 1,00 | Mn 0,4 | Devis |
| Cupro Nickel 20% | C71000 | 20,0 | – | – | – | – | – | – | – | 78,80 | 0,60 | Mn 0,6 | Devis |
| Cupro Nickel 30% | C71500 2.0882 | 30,0 | – | – | – | – | – | – | – | 68,90 | 0,50 | Mn 0,6 | Devis |
| D 979 | 45,0 | 15,0 | – | 3,70 | 3,70 | – | 3,00 | 1,00 | – | 27,0 | – | Devis | |
| Densalloy | 6,0 | – | – | – | 90,0 | – | – | – | 4,00 | – | – | Devis | |
| Discaloy | 26,0 | 13,5 | – | 2,75 | – | 0,08 | 1,60 | 0,35 | – | reste | – | Devis | |
| Dumet | 28,0 | – | – | – | – | – | – | – | 27,00 | reste | – | Devis | |
| Duranickel | N03301 | 94,0 | – | – | – | – | 0,15 | 0,50 | 4,50 | 0,05 | 0,15 | Mn 0,25 · Si 0,55 | Devis |
| E-Brite | S44627 | – | 23–27,5 | – | 0,75–1,5 | – | 0,005 | – | – | 0,20 | reste | Cu + Ni 0,50 · Si 0,40 · Mn 0,40 | Devis |
| Elgiloy | R30003 | 15,0 | 20,0 | 40,0 | 7,00 | – | 0,15 | – | – | – | reste | Mn 2,0 · Be 0,04 | Devis |
| ERE | 37,0 | 25,0 | – | 1,5 | – | 0,40 | – | – | – | 36,0 | – | Devis | |
| Ferralium | S32550 1.4507 | 4,5–6,5 | 24–27 | – | 2–4 | – | 0,08 | – | – | 1,5–2,5 | reste | N 0,10–0,25 | Devis |
| GMR-235 | 63,0 | 15,5 | – | 5,25 | – | 0,10 | 2,00 | 3,00 | – | 10,00 | B 0,04 | Devis | |
| Greek Ascoloy | S41800 | 2,0 | 13,5 | – | – | 3,00 | 0,15 | – | – | – | reste | – | Devis |
| Hastelloy A | 59,0 | – | – | 20,0 | – | 0,10 | – | – | – | 20,0 | – | Devis | |
| Hastelloy B | N10001 | 64,0 | – | – | 28,0 | – | 0,10 | – | – | – | 6,00 | – | Devis |
| Hastelloy C | N10002 | 57,0 | 16,0 | – | 17,0 | 4,5 | 0,15 | – | – | – | 5,55 | – | Devis |
| Hastelloy C-276 Fiche | N10276 2.4819 | 56,0 | 15,5 | 2,5 max | 16,0 | 3,5 | 0,02 max | – | – | – | 5,5 | Mn 1,0 max | Devis |
| Hastelloy D | 85,0 | – | – | – | – | 0,10 | – | – | 4,00 | 1,00 | Si 10,0 | Devis | |
| Hastelloy F | 47,0 | 22,0 | 2,50 | 6,50 | 1,0 | – | – | – | – | – | Cb 2,0 | Devis | |
| Hastelloy G | N06007 2.4618 | 45,0 | 22,0 | 2,50 | 6,50 | 1,0 | 0,05 | – | – | 2,50 | – | Mn 2,0 · Cb + Ta 2,50 | Devis |
| Hastelloy N | N10003 | 71,0 | 7,0 | – | 16,5 | – | 0,06 | – | 0,50 | – | 5,0 | – | Devis |
| Hastelloy R | 65,0 | 15,5 | 1,50 | 5,0 | – | 0,10 | 2,50 | 2,25 | – | 7,0 | – | Devis | |
| Hastelloy S | N06635 | 68,7 | 15,5 | – | 15,5 | – | – | – | 0,2 | – | 1,0 | – | Devis |
| Hastelloy W | N10004 | 60,0 | 5,0 | 2,50 | 25,0 | – | 0,12 | – | – | – | 5,5 | V 0,60 | Devis |
| Hastelloy X | N06002 2.4665 | 45,0 | 22,0 | 1,5 | 9,0 | 0,60 | 0,10 | – | – | – | reste | – | Devis |
| HOM-3 | 45 | 26 | 3 | 3 | 3 | 0,45 | – | – | – | reste | – | Devis | |
| HS-1 | R30001 | – | 30,0 | 55,0 | – | 12,0 | 2,50 | – | – | – | – | – | Devis |
| HS-3 | – | 31,0 | 50,0 | – | 12,5 | 2,50 | – | – | – | 3,0 | – | Devis | |
| HS-4 | 3,0 | 30,0 | 51,0 | – | 14,0 | – | – | – | – | 3,0 | – | Devis | |
| HS-6 | R30006 | 3,0 | 30,0 | 56,0 | 1,5 | 5,0 | – | – | – | – | 3,0 | – | Devis |
| HS-12 | R30012 | 3,0 | 31,0 | 56,0 | – | 8,0 | – | – | – | – | 2,0 | – | Devis |
| HS-19 | 3,0 | 31,0 | 53,0 | – | 10,0 | – | – | – | – | 3,0 | – | Devis | |
| HS-21 | R30021 | 2,5 | 27,0 | 62,0 | 5,5 | – | – | – | – | – | 2,0 | – | Devis |
| HS-23 | 2,0 | 26,0 | 66,0 | – | 5,0 | 0,40 | – | – | – | 2,0 | – | Devis | |
| HS-25 (L 605) | R30605 2.4964 | 10,0 | 20,0 | 50,0 | 1,0 | 15,0 | – | – | – | – | 3,0 | – | Devis |
| HS-27 | 35,0 | 26,0 | 30,0 | 6,0 | – | – | – | – | – | 2,0 | – | Devis | |
| HS-30 | 15,0 | 26,0 | 51,0 | 6,0 | – | – | – | – | – | 2,0 | – | Devis | |
| HS-31 | R30031 | 10,5 | 26,0 | 55,0 | – | 7,5 | – | – | – | – | 2,0 | – | Devis |
| HS-151 | 1,0 | 20,0 | 65,0 | – | 13,0 | 0,50 | – | – | – | 2,0 | – | Devis | |
| HS-188 | R30188 2.4683 | 22,0 | 22,0 | 36,0 | – | 14,0 | 0,10 | – | – | – | 3,0 | – | Devis |
| HS Star J | 2,5 | 35,0 | 40,0 | – | 20,0 | 2,4 | – | – | – | 3,0 | B 0,2 | Devis | |
| Hypernick | 50,0 | – | – | – | – | – | – | – | – | 50,0 | – | Devis | |
| Hy Mu 80 | 80,0 | – | – | 4,0 | – | – | – | – | – | 16,0 | – | Devis | |
| Illium D | – | 27,0 | 65,0 | 4,5 | 1,0 | 0,20 | – | – | – | 1,0 | – | Devis | |
| Illium G | 57,0 | 22,5 | – | 6,4 | – | – | – | – | 6,5 | 6,5 | – | Devis | |
| Illium R | 64,0 | 22,0 | – | 5,0 | – | – | – | – | 2,5 | 6,0 | – | Devis | |
| Illium X | 1,0 | 28,5 | 52,0 | – | 15,0 | 0,85 | – | – | – | 2,0 | Mn 0,25 · Si 0,40 | Devis | |
| Illium 98 | 55,0 | 28,0 | – | 8,0 | – | 0,05 | – | – | 5,0 | – | – | Devis | |
| IN 100 | 60,0 | 10,0 | 15,0 | 3,0 | – | – | 5,00 | 5,50 | – | – | V 1,0 | Devis | |
| IN 102 | 68,0 | 15,0 | 3,0 | 3,0 | 3,0 | 0,06 | 0,50 | 0,50 | – | 7,0 | Cb 3,0 | Devis | |
| Incoloy 800 | N08800 1.4876 | 32,0 | 20,5 | – | – | – | 0,10 | 0,40 | 0,40 | – | 46,0 | – | Devis |
| Incoloy 801 | N08801 | 32,0 | 20,5 | – | – | – | – | 1,10 | – | – | 45,0 | – | Devis |
| Incoloy 802 | 32,5 | 21,0 | – | – | – | 0,35 | 0,75 | 0,60 | – | 45,0 | – | Devis | |
| Incoloy 825 | N08825 2.4858 | 42,0 | 21,5 | – | 3,0 | – | 0,05 | 1,00 | 0,20 | 2,0 | reste | – | Devis |
| Incoloy 840 | 21,0 | 19,0 | – | – | – | 0,03 | – | – | – | 58,0 | – | Devis | |
| Incoloy 901 | N09901 2.4662 | 42,5 | 12,5 | – | 6,0 | – | 0,05 | 2,70 | 0,35 | 0,1 | 34,0 | – | Devis |
| Inconel 600 | N06600 2.4816 | 75,5 | 15,5 | – | – | – | 0,04 | – | – | 0,1 | 8,0 | – | Devis |
| Inconel 601 | N06601 2.4851 | 60,5 | 23,0 | – | – | – | 0,05 | – | 1,35 | 0,5 | 14,0 | – | Devis |
| Inconel 617 | N06617 2.4663 | 54,0 | 22,0 | 12,5 | 9,0 | – | 0,07 | – | 1,0 | – | – | – | Devis |
| Inconel 625 Fiche | N06625 2.4856 | 61,0 | 20,5 | – | 9,0 | – | 0,05 | – | – | – | 2,5 | Cb 4,02 | Devis |
| Inconel 700 | 46,0 | 15,0 | 28,5 | 3,75 | – | – | 2,20 | 3,0 | – | 0,5 | – | Devis | |
| Inconel 702 | 79,5 | 16,0 | – | – | – | 0,05 | 0,50 | 3,50 | 0,25 | 1,0 | – | Devis | |
| Inconel 713 | 71,0 | 13,4 | 1,00 | 4,5 | – | 0,12 | 1,00 | 6,20 | – | 2,5 | – | Devis | |
| Inconel 713LC | 72,0 | 13,0 | – | 4,5 | – | 0,05 | 0,60 | 6,00 | – | 1,0 | Cb 2,25 | Devis | |
| Inconel 718 Fiche | N07718 2.4668 | 52,5 | 19,0 | – | 3,05 | – | 0,04 | 0,90 | 0,50 | 0,15 | 18,5 | Cb + Ta 5,13 | Devis |
| Inconel 721 | 71,0 | 16,0 | – | – | – | 0,04 | 3,50 | – | 0,10 | 7,0 | Mn 2,25 | Devis | |
| Inconel 722 | 75,0 | 15,5 | – | – | – | 0,04 | 2,40 | 0,70 | 0,10 | 7,0 | – | Devis | |
| Inconel 738 | 61,0 | 16,0 | 8,5 | 1,7 | 2,6 | 0,17 | 3,40 | 3,40 | – | – | Cb 1,9 · Ta 1,7 | Devis | |
| Inconel 750 | N07750 2.4669 | 73,0 | 15,5 | – | – | – | 0,04 | 2,50 | 0,70 | 0,50 | 7,0 | Cb + Ta 0,95 | Devis |
| Inconel 751 | N07751 | 72,5 | 15,5 | – | – | – | 0,05 | 2,50 | 1,20 | 0,50 | 7,0 | Cb + Ta 1,0 | Devis |
| Inconel 901 | N09901 2.4662 | 42,5 | 12,5 | 1,0 | 6,0 | – | 0,05 | 2,70 | 0,4 | 0,1 | 34,0 | – | Devis |
| Invar | K93600 1.3912 | 36,0 | – | – | – | – | 0,18 | – | – | – | reste | – | Devis |
| Jetalloy 1570 | 29,0 | 20,0 | 37,5 | – | 7 | 0,20 | 4,2 | – | – | – | – | Devis | |
| Kovar | K94610 1.3981 | 29,0 | – | 17,0 | – | – | – | – | – | – | 53,8 | Mn 0,20 | Devis |
| L 605 | → voir HS-25 (L 605) | ||||||||||||
| M 252 | N07252 | 53,5 | 19,0 | 10,0 | 9,5 | – | 0,15 | 2,5 | 1,0 | – | 5,0 | – | Devis |
| Mallory 1000 | 6,0 | – | – | – | 90,0 | – | – | – | 4,0 | – | – | Devis | |
| Manuarite 36X | 35,0 | 25,0 | – | – | 2,0 | 0,40 | – | – | – | 36,0 | Nb (Cb) 2,0 | Devis | |
| Maraging 250 | K92890 1.6359 | 18,0 | – | 7,5 | 4,7 | – | 0,03 | 0,4 | 0,1 | – | reste | – | Devis |
| Maraging 300 | K93120 1.6354 | 18,5 | – | 8,75 | 4,8 | – | 0,03 | 0,6 | 0,1 | – | reste | – | Devis |
| MAR-M 200 | 60,0 | 9,0 | 10,0 | – | 12,5 | 0,15 | 2,0 | 5,0 | – | 0,3 | – | Devis | |
| MAR-M 302 | – | 21,5 | 57,0 | – | 10,0 | 0,85 | – | – | – | 0,8 | Ta 9,0 · Si 0,3 · Mn 0,1 · Zr 0,2 | Devis | |
| MAR-M 509 | 10,0 | 22,5 | 53,0 | – | 7,0 | 0,6 | 0,2 | – | – | 1,5 | Ta 3,5 · Si 0,4 · Mn 0,1 · Zr 0,5 | Devis | |
| Monel 400 (R) Fiche | N04400 2.4360 | 66,0 | – | – | – | – | 0,12 | – | – | 31,0 | 2,0 | Mn 1,0 | Devis |
| Monel 404 | N04404 | 54,4 | – | – | – | – | 0,06 | – | 0,03 | 44,0 | 0,05 | – | Devis |
| Monel R405 | N04405 | 66,0 | – | – | – | – | 0,18 | – | – | 31,5 | 1,35 | Mn 1,0 | Devis |
| Monel K500 | N05500 2.4375 | 66,5 | – | – | – | – | 0,15 | 0,5 | 3,00 | 29,5 | 1,0 | Mn 0,75 | Devis |
| Monel 505 (S) | 64,0 | – | – | – | – | 0,80 | – | – | 29,0 | 2,0 | Mn 0,8 · Si 4,0 | Devis | |
| Monel 508 (H) | 64,0 | – | – | – | – | 0,10 | – | – | 30,0 | 1,5 | Si 3,2 | Devis | |
| Multimet | → voir N 155 (Multimet) | ||||||||||||
| Mu Metal | 75,0 | 2,0 | – | – | – | – | – | – | 5,0 | 18,0 | – | Devis | |
| N 153 | 24,0 | 17,0 | 21,0 | 3,0 | 2,0 | 0,32 | – | – | – | reste | Cb 1,0 | Devis | |
| N 155 (Multimet) | R30155 | 20,0 | 20,0 | 20,0 | 3,0 | 2,5 | 0,15 | – | – | – | reste | Cb 1,0 | Devis |
| N 156 | 15,0 | 17,0 | 12,0 | 3,0 | 2,0 | 0,32 | – | – | – | reste | Cb 1,0 | Devis | |
| NA 22H Fiche | 2.4879 | 48,0 | 28,0 | – | – | 5,0 | 0,50 | – | – | – | reste | Si 1,0 · Mn 1,3 | Devis |
| Nichrome | N06004 2.4867 | 60,0 | 15,0 | – | – | – | 0,40 | – | – | – | reste | Si 1,4 | Devis |
| Nichrome V | N06003 2.4869 | 79,0 | 20,0 | – | – | – | 0,40 | – | – | – | reste | Si 1,4 | Devis |
| Nickel 200 | N02200 2.4066 | 99,5 | – | – | – | – | 0,06 | – | – | 0,05 | 0,15 | Mn 0,2 | Devis |
| Nickel 202 | 95,5 | – | – | – | 3,80 | 0,03 | – | – | 0,02 | 0,05 | – | Devis | |
| Nickel 204 | 95,2 | – | 4,5 | – | – | 0,03 | – | – | 0,02 | – | – | Devis | |
| Nickel 210 | 95,6 | – | – | – | – | 0,80 | – | – | 0,50 | 0,50 | Si 1,6 | Devis | |
| Nickel 211 (D) | N02211 | 95,0 | – | – | – | – | 0,10 | – | – | 0,30 | 0,50 | Mn 4,5 | Devis |
| Nickel 213 (G) | 95,0 | – | – | – | – | 1,50 | – | – | 0,50 | 0,50 | Si 1,6 | Devis | |
| Nickel 305 (S) | 91,5 | – | – | – | – | 0,80 | – | – | 0,50 | 0,50 | Si 6,0 | Devis | |
| Nicrotung | 61,0 | 12,0 | 10,0 | – | 10 | 0,10 | 4,0 | 4,0 | – | – | – | Devis | |
| Ni-Hard | 4,5 | 2,0 | – | – | – | 3,00 | – | – | – | 89,5 | Mn 0,5 · Si 0,5 | Devis | |
| Nimonic 75 Fiche | N06075 2.4951 | 77,6 | 20,5 | – | – | – | 0,10 | 0,35 | 0,2 | 0,05 | 0,50 | – | Devis |
| Nimonic 80 | 74,5 | 20,5 | – | – | – | 0,05 | 2,50 | 1,25 | 0,05 | 0,55 | – | Devis | |
| Nimonic 90 | N07090 2.4632 | 58,0 | 19,5 | 18,0 | – | – | 0,10 | 2,3 | 1,2 | – | – | – | Devis |
| Nimonic 95 | 50,0 | 20,0 | 20,0 | – | – | – | 3,0 | 2,0 | – | – | – | Devis | |
| Nimonic 100 | 50,0 | 19,0 | 20,0 | 5,0 | – | 0,10 | 3,0 | 2,0 | – | – | – | Devis | |
| Nimonic 105 | 2.4634 | 46,0 | 15,0 | 20,0 | 5,0 | – | 0,15 | 1,45 | 4,5 | – | – | – | Devis |
| Nimonic 115 | 42,5 | 15,0 | 15,0 | 3,5 | – | 0,20 | 4,0 | 5,0 | – | – | – | Devis | |
| Ni-Resist 1 Fiche | 15,5 | 1,75 | – | – | – | 3,00 | – | – | 6,0 | reste | Si 2,0 | Devis | |
| Ni-Resist 2 | 20,0 | 2,0 | – | – | – | 3,00 | – | – | – | reste | Si 2,0 | Devis | |
| Ni-Resist 3 | 30,0 | 3,0 | – | – | – | 2,60 | – | – | – | reste | Si 1,5 | Devis | |
| Ni-Resist 4 | 30,5 | 5,0 | – | – | – | 2,60 | – | – | – | reste | Si 5,5 | Devis | |
| Ni-Resist 5 | 35,0 | 3,1 | – | – | – | 2,40 | – | – | – | reste | Si 1,5 | Devis | |
| Nitronic 33 | S24000 | 2,25–3,75 | 17,0–19,0 | – | – | – | 0,08 | – | – | – | reste | – | Devis |
| Nitronic 40 | S21900 | 5–7 | 18–20 | – | – | – | 0,08 | – | – | – | reste | Mn 8–10 · Si 1,0 | Devis |
| Nitronic 50 | S20910 | 11,5–13,5 | 20,5–23,5 | – | 1,5–3 | – | 0,06 | – | – | – | reste | Mn 4–6 · Si 1,0 | Devis |
| Nitronic 60 Fiche | S21800 | 8–9 | 16–18 | – | – | – | 0,10 | – | – | – | reste | Mn 7–9 · Si 3,5–4,5 | Devis |
| Ni-Span C | N09902 | 42,0 | 5,4 | – | – | – | 0,02 | 2,4 | 0,65 | 0,05 | reste | – | Devis |
| Permalloy | 78,5 | – | – | – | – | – | – | – | – | 21,5 | – | Devis | |
| Permendur | – | – | 50,0 | – | – | – | – | – | – | 50,0 | – | Devis | |
| PWA 653 | → voir WI 52 | ||||||||||||
| PWA 663 | → voir B 1900 | ||||||||||||
| PWA 686 | 57,0 | 19,5 | 13,5 | 4,0 | – | 0,05 | 2,5 | 1,5 | – | 2,0 | – | Devis | |
| PWA 688 | → voir Udimet 500 | ||||||||||||
| PWA 689 | → voir Udimet 700 | ||||||||||||
| RA 330 | N08330 1.4886 | 35,0 | 19,0 | – | – | – | 0,06 | – | – | 0,5 | 43,0 | Mn 1,5 · Si 1,25 | Devis |
| RA 333 | N06333 | 45,0 | 25,0 | 3,0 | 3,0 | 3,0 | 0,05 | – | – | 0,5 | 18,0 | – | Devis |
| Remendur | – | – | 50,0 | – | – | – | – | – | – | reste | V 5,0 | Devis | |
| René 41 | N07041 2.4973 | 55,5 | 19,0 | 11,0 | 10,0 | – | 0,09 | 3,2 | 1,6 | – | – | – | Devis |
| René 77 | 57,0 | 15,0 | 15,0 | 5,0 | – | 0,06 | 3,5 | 4,4 | – | – | – | Devis | |
| René 80 | 60,28 | 14,0 | 9,5 | 4,0 | 4,0 | 0,18 | 5,0 | 3,0 | – | – | – | Devis | |
| René 88 | 54,0 | 16,0 | 13,0 | 4,0 | 4,0 | – | 3,5 | 2,0 | – | 0,250 | – | Devis | |
| Rexalloy | – | 33,0 | 44,0 | – | 17,0 | 2,2 | – | – | – | 1,0 | – | Devis | |
| S-816 | R30816 | 20,0 | 20,0 | 43,0 | 4,0 | 4,0 | 0,38 | – | – | – | 4,0 | Mn 0,20 · Cb 4,0 | Devis |
| Sealmet | 42,0 | – | 5,0 | – | – | – | – | – | – | 53,0 | – | Devis | |
| SMO 254 Fiche | S31254 1.4547 | 18,0 | 19,5 | – | 6,0 | – | – | – | – | 0,5 | 56,0 | – | Devis |
| Stellites | → voir série HS (HS-1 … HS-188) | ||||||||||||
| Supertherm | 35,0 | 26,0 | 15,0 | – | 5,0 | 0,5 | – | – | – | reste | Si 1,6 | Devis | |
| Thetalcy | 49,0 | 25,0 | 12,5 | 3,0 | 7,0 | – | – | – | – | 3,0 | – | Devis | |
| Ticonium | 30,0 | 25,0 | 30,0 | 6,0 | – | 0,06 | – | – | – | – | – | Devis | |
| Tophet A | 80,0 | 20,0 | – | – | – | – | – | – | – | – | – | Devis | |
| Tophet B | 70,0 | 20,0 | – | – | – | – | – | – | – | reste | – | Devis | |
| Tophet C | 61,0 | 15,0 | – | – | – | – | – | 3,0 | – | reste | – | Devis | |
| Tophet M | 65,0 | 30,0 | – | – | – | 5,00 | – | – | – | – | – | Devis | |
| Timken (16-15-6) | 15,0 | 16,0 | – | 6,0 | – | – | – | – | – | reste | Mn 7,5 | Devis | |
| TZM Fiche | R03630 | – | – | – | reste | – | 0,015 | 0,5 | – | – | – | Zr 0,08 | Devis |
| Udimet 200 | → voir Incoloy 901 | ||||||||||||
| Udimet 500 | 53,0 | 17,5 | 16,5 | 4,0 | – | 0,10 | 3,0 | 3,0 | – | 2,0 | – | Devis | |
| Udimet 520 | 56,0 | 19,0 | 12,0 | 6,0 | 1,0 | – | 3,0 | 2,0 | – | 1,0 | – | Devis | |
| Udimet 600 | 52,0 | 17,5 | 16,5 | 4,0 | – | – | 2,9 | 4,2 | – | 4,0 | – | Devis | |
| Udimet 700 | 52,0 | 15,0 | 18,5 | 4,0 | – | 0,07 | 3,5 | 4,2 | – | 1,0 | – | Devis | |
| Udimet 710 | 55,0 | 18,0 | 15,0 | 3,0 | 1,5 | 0,07 | 5,0 | 2,5 | – | – | – | Devis | |
| UMCo 50 Fiche | 2.4778 | – | 28,0 | 52,0 | – | – | 0,1 | – | – | – | 20,0 | – | Devis |
| UMCo 51 | – | 28,0 | 50,0 | – | – | 0,27 | – | – | – | 20,0 | Cb 2,0 | Devis | |
| Vicalloy I | – | – | 52,0 | – | – | – | – | – | – | reste | V 9,5 | Devis | |
| Vicalloy II | – | – | 51,7 | – | – | 0,02 | – | – | – | reste | V 14,0 · Mn 0,30 | Devis | |
| Waspaloy Fiche | N07001 2.4654 | 55,0 | 19,0 | 13,5 | 4,25 | – | 0,07 | 3,0 | 1,4 | – | 1,0 | – | Devis |
| Waspaloy (mod.) | 56,0 | 19,0 | 11,5 | 7,0 | – | 0,05 | 2,5 | 1,2 | – | 1,2 | – | Devis | |
| WI 52 | 1,0 | 21,0 | 64,0 | – | 11,0 | 0,45 | – | – | – | 0,6 | Mn 0,5 · Si 0,5 · Cb + Ta 2,0 | Devis | |
| Zircaloy-2 | R60802 | 0,05 | 0,1 | – | – | – | – | – | – | – | 0,12 | Sn 1,5 · Zr reste | Devis |
| Z Nickel | → voir Duranickel | ||||||||||||
03 · 17 alliages
Aciers à outils
Travail à froid, trempe à l’air et à l’eau
| AISI | UNS · W.Nr. | C | Mn | Si | Cr | Ni | V | W | Mo | Co | Devis |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Travail à froid – trempe à l’huile | |||||||||||
| O1 | T31501 1.2510 | 0,90 | 1,00 | – | 0,50 | – | – | 0,50 | – | – | Devis |
| O2 | T31502 1.2842 | 0,90 | 1,60 | – | – | – | – | – | – | – | Devis |
| O6 | T31506 | 1,45 | – | 1,00 | – | – | – | – | 0,25 | – | Devis |
| O7 | T31507 | 1,20 | – | – | 0,75 | – | – | 1,75 | – | – | Devis |
| Moyennement alliés – trempe à l’air | |||||||||||
| A2 | T30102 1.2363 | 1,00 | – | – | 5,00 | – | – | – | 1,00 | – | Devis |
| A3 | T30103 | 1,25 | – | – | 5,00 | – | 1,00 | – | 1,00 | – | Devis |
| A4 | T30104 | 1,00 | 2,00 | – | 1,00 | – | – | – | 1,00 | – | Devis |
| A5 | T30105 | 1,00 | 3,00 | – | 1,00 | – | – | – | 1,00 | – | Devis |
| A6 | T30106 | 0,70 | 2,00 | – | 1,00 | – | – | – | 1,00 | – | Devis |
| A7 | T30107 | 2,25 | – | – | 5,25 | – | 4,75 | 1,00 | 1,00 | – | Devis |
| A8 | T30108 | 0,55 | – | – | 5,00 | – | – | 1,25 | 1,25 | – | Devis |
| A9 | T30109 | 0,50 | – | – | 5,00 | 1,50 | 1,00 | – | 1,40 | – | Devis |
| A10 | T30110 | 1,35 | 1,80 | 1,25 | – | 1,50 | – | – | 1,50 | – | Devis |
| Trempe à l’eau | |||||||||||
| W1 | T72301 | 0,60–1,40 | – | – | – | – | – | – | – | – | Devis |
| W2 | T72302 | 0,60–1,40 | – | – | – | – | 0,25 | – | – | – | Devis |
| W4 | 0,60–1,40 | – | – | 0,25 | – | – | – | – | – | Devis | |
| W5 | T72305 | 1,10 | – | – | 0,50 | – | – | – | – | – | Devis |
04 · 23 alliages
Aciers à outils
Haut carbone au chrome et travail à chaud
| AISI | UNS · W.Nr. | C | Cr | V | W | Mo | Co | Devis |
|---|---|---|---|---|---|---|---|---|
| Haut carbone – au chrome | ||||||||
| D1 | 1,00 | 12,00 | – | – | 1,00 | – | Devis | |
| D2 | T30402 1.2379 | 1,50 | 12,00 | – | – | 1,00 | – | Devis |
| D3 | T30403 1.2080 | 2,25 | 12,00 | – | – | – | – | Devis |
| D4 | T30404 | 2,25 | 12,00 | – | – | 1,00 | – | Devis |
| D5 | T30405 | 1,50 | 12,00 | – | – | 1,00 | 3,00 | Devis |
| D7 | T30407 | 2,35 | 12,00 | 4,00 | – | 1,00 | – | Devis |
| Travail à chaud – au chrome | ||||||||
| H10 | T20810 1.2365 | 0,40 | 3,33 | 0,40 | – | 2,50 | – | Devis |
| H11 Fiche | T20811 1.2343 | 0,35 | 5,00 | 0,40 | – | 1,50 | – | Devis |
| H12 | T20812 1.2606 | 0,35 | 5,00 | 0,40 | 1,50 | 1,50 | – | Devis |
| H13 Fiche | T20813 1.2344 | 0,35 | 5,00 | 1,00 | – | 1,50 | – | Devis |
| H14 | T20814 | 0,40 | 5,00 | – | 5,00 | – | – | Devis |
| H16 | 0,55 | 7,00 | – | 7,00 | – | – | Devis | |
| H19 | T20819 | 0,40 | 4,25 | 2,00 | 4,25 | – | 4,25 | Devis |
| Travail à chaud – au tungstène | ||||||||
| H20 | 0,35 | 2,00 | – | 9,00 | – | – | Devis | |
| H21 | T20821 1.2581 | 0,35 | 3,50 | – | 9,00 | – | – | Devis |
| H22 | T20822 | 0,35 | 2,00 | – | 11,00 | – | – | Devis |
| H23 | T20823 | 0,30 | 12,00 | – | 12,00 | – | – | Devis |
| H24 | T20824 | 0,45 | 3,00 | – | 15,00 | – | – | Devis |
| H25 | T20825 | 0,25 | 4,00 | – | 15,00 | – | – | Devis |
| H26 | T20826 | 0,50 | 4,00 | 1,00 | 18,00 | – | – | Devis |
| Travail à chaud – au molybdène | ||||||||
| H41 | T20841 | 0,65 | 4,00 | 1,00 | 1,50 | 8,00 | – | Devis |
| H42 | T20842 | 0,60 | 4,00 | 2,00 | 6,00 | 5,00 | – | Devis |
| H43 | T20843 | 0,55 | 4,00 | 2,00 | – | 8,00 | – | Devis |
05 · 27 alliages
Aciers rapides (HSS)
Au tungstène et au molybdène
| AISI | UNS · W.Nr. | C | Cr | V | W | Mo | Co | Devis |
|---|---|---|---|---|---|---|---|---|
| Aciers rapides – au tungstène | ||||||||
| T1 Fiche | T12001 1.3355 | 0,70 | 4,00 | 1,00 | 18,00 | – | – | Devis |
| T2 | T12002 | 0,80 | 4,00 | 2,00 | 18,00 | – | – | Devis |
| T4 | T12004 1.3255 | 0,75 | 4,00 | 1,00 | 18,00 | – | 5,00 | Devis |
| T5 | T12005 | 0,80 | 4,00 | 2,00 | 18,00 | – | 8,00 | Devis |
| T6 | T12006 | 0,80 | 4,50 | 1,50 | 20,00 | – | 12,00 | Devis |
| T7 | 0,75 | 4,00 | 2,00 | 14,00 | – | – | Devis | |
| T8 | T12008 | 0,75 | 4,00 | 2,00 | 14,00 | – | 5,00 | Devis |
| T9 | 1,20 | 4,00 | 4,00 | 18,00 | – | – | Devis | |
| T15 Fiche | T12015 1.3202 | 1,50 | 4,00 | 5,00 | 12,00 | – | 5,00 | Devis |
| Aciers rapides – au molybdène | ||||||||
| M1 | T11301 1.3346 | 0,80 | 4,00 | 1,00 | 1,50 | 8,00 | – | Devis |
| M2 Fiche | T11302 1.3343 | 0,85 | 4,00 | 2,00 | 6,00 | 5,00 | – | Devis |
| M3 (Class 1) | T11313 | 1,05 | 4,00 | 2,40 | 6,00 | 5,00 | – | Devis |
| M3 (Class 2) | T11323 | 1,20 | 4,00 | 3,00 | 6,00 | 5,00 | – | Devis |
| M4 | T11304 | 1,30 | 4,00 | 4,00 | 5,50 | 4,50 | – | Devis |
| M6 | 0,80 | 4,00 | 1,50 | 4,00 | 5,00 | 12,00 | Devis | |
| M7 | T11307 1.3348 | 1,00 | 4,00 | 2,00 | 1,75 | 8,75 | – | Devis |
| M10 | T11310 | 0,90 | 4,00 | 2,00 | – | 8,00 | – | Devis |
| M15 | 1,50 | 4,00 | 5,00 | 6,50 | 3,50 | 5,00 | Devis | |
| M30 | T11330 | 0,80 | 4,00 | 1,25 | 2,00 | 8,00 | 5,00 | Devis |
| M33 | T11333 | 0,90 | 4,00 | 1,15 | 1,50 | 9,50 | 8,00 | Devis |
| M34 | T11334 | 0,90 | 4,00 | 2,00 | 2,00 | 8,00 | 8,00 | Devis |
| M35 Fiche | 1.3243 | 0,80 | 4,00 | 2,00 | 6,00 | 5,00 | 5,00 | Devis |
| M36 | T11336 | 0,80 | 4,00 | 2,00 | 6,00 | 5,00 | 8,00 | Devis |
| M41 | T11341 | 1,10 | 4,25 | 2,00 | 6,75 | 3,75 | 5,00 | Devis |
| M42 | T11342 1.3247 | 1,10 | 3,75 | 1,15 | 1,50 | 9,50 | 8,00 | Devis |
| M43 | T11343 | 1,25 | 3,75 | 2,00 | 1,75 | 8,75 | 8,25 | Devis |
| M44 | T11344 | 1,15 | 4,25 | 2,25 | 5,25 | 6,25 | 12,00 | Devis |
06 · 24 alliages
Titane et alliages de titane
Ti : reste, sauf indication contraire
| Alliage | UNS · W.Nr. | Ti | Al | V | Sn | Mo | Autres | Devis |
|---|---|---|---|---|---|---|---|---|
| C.P. Fiche | ≥ 99,0 | – | – | – | – | – | Devis | |
| Ti Pd Fiche Ti-0.2Pd | reste | – | – | – | – | Pd 0,20 | Devis | |
| 2 Ni | reste | – | – | – | – | Ni 2 | Devis | |
| 2.5 Cu Ti-2.5Cu | reste | – | – | – | – | Cu 2,5 | Devis | |
| 8 Mn Ti-8Mn | R56080 | reste | – | – | – | – | Mn 8 | Devis |
| 3-2.5 Ti-3Al-2.5V | R56320 3.7195 | reste | 3 | 2,5 | – | – | – | Devis |
| 3-8-6-4-4 Ti-3Al-8V-6Cr-4Mo-4Zr | R58640 | reste | 3 | 8 | – | 4 | Cr 6 · Zr 4 | Devis |
| 4-3-1 Ti-4Al-3Mo-1V | reste | 4 | 1 | – | 3 | – | Devis | |
| 4-4 Ti-4Al-4Mn | reste | 4 | – | – | – | Mn 4 | Devis | |
| 4-4-2-.5 | reste | 4 | – | 2 | 4 | Si 0,5 | Devis | |
| 4-4-4-.6 | reste | 4 | – | 4 | 4 | Si 0,5 | Devis | |
| 5-2.5 Ti-5Al-2.5Sn | R54520 3.7115 | reste | 5 | – | 2,5 | – | – | Devis |
| 5-6-2-1-.25 | reste | 5 | – | 6 | 1 | Si 0,25 · Zr 2 | Devis | |
| 6-2-1-1 Ti-6Al-2Nb-1Ta-0.8Mo | R56210 | reste | 6 | – | – | 1 | Cb 2 · Ta 1 | Devis |
| 6-2-4-2 Ti-6Al-2Sn-4Zr-2Mo | R54620 | reste | 6 | – | 2 | 2 | Zr 4 | Devis |
| 6-2-4-6 Ti-6Al-2Sn-4Zr-6Mo | R56260 | reste | 6 | – | 2 | 6 | Zr 4 | Devis |
| 6-4 Fiche Ti-6Al-4V | R56400 3.7165 | reste | 6 | 4 | – | – | – | Devis |
| 6-5-.5-2.5 | reste | 6 | – | – | 0,5 | Si 0,25 · Zr 5 | Devis | |
| 6-6-2 Ti-6Al-6V-2Sn | R56620 | reste | 6 | 6 | 2 | – | – | Devis |
| 7-4 Ti-7Al-4Mo | R56740 | reste | 7 | – | – | 4 | – | Devis |
| 8-1-1 Ti-8Al-1Mo-1V | R54810 | reste | 8 | 1 | – | 1 | – | Devis |
| 11-5-2.3-1-.25 | reste | 2,3 | – | 11 | 1 | Si 0,25 · Zr 5 | Devis | |
| 13-11-3 Ti-13V-11Cr-3Al | R58010 | reste | 3 | 13 | – | – | Cr 11 | Devis |
| T-17 Ti-5Al-2Sn-2Zr-4Mo-4Cr | R58650 | 83 | 5 | – | 2 | 4 | Zr 2 · Cr 4 | Devis |
07 · 7 alliages
Alliages de titane – nuances russes
VT / BT / OT
| Nuance | UNS · W.Nr. | Ti | Al | V | Sn | Mn | Mo | Fe | C | Cr | Si | Devis |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VT-6 | reste | 6 | 4 | – | – | – | – | – | – | 0,15 | Devis | |
| VT-10 | reste | – | – | – | – | – | 0,3 | 0,05 | – | 0,15 | Devis | |
| BT1-0 | reste | 0,5 | – | – | – | – | 0,25 | 0,07 | – | 0,15 | Devis | |
| BT1-2 | reste | – | – | – | – | – | 1,5 | 0,1 | – | 0,15 | Devis | |
| OT4-0 | reste | 1,0* | – | – | 1 | – | 0,3 | 0,1 | – | 0,12 | Devis | |
| OT4-1 | reste | 2 | – | – | 1,5 | – | 0,3 | 0,1 | – | 0,12 | Devis | |
| OT4 | reste | 4,5 | – | – | 1,5 | – | 0,3 | 0,1 | – | 0,12 | Devis |
* = valeur maximale
Comment lire le tableau
- Valeurs nominales ou typiques en % massique. Les plages sont des limites d’analyse ; « max » et « min » les valeurs maximales et minimales ; « reste » l’élément de base. Seul le certificat matière fait foi pour la composition réelle de chaque lot.
- UNS et W.Nr. (numéro de matériau EN / Werkstoff-Nr.) : équivalences de référence, indiquées uniquement lorsqu’elles sont certaines. Des matériaux équivalents de normes différentes peuvent légèrement différer dans leurs limites d’analyse.
- Les alliages marqués « Fiche » disposent d’une page complète : composition détaillée, propriétés, applications et formes que nous achetons.
- Cb (columbium) est l’ancienne dénomination américaine du niobium (Nb).
→ · Devis
Vous avez l’un de ces alliages à vendre ?
Indiquez-nous l’alliage, la forme (chutes, tournures, barres…), la quantité et la zone d’enlèvement : nous vous répondons rapidement avec un devis. Si vous ne connaissez pas l’analyse exacte, une photo ou le certificat suffira lorsque nous vous recontacterons.
Tél +41 91 9856992
Mobile +39 3494906948
contacts@giulianimetalli.com